LTC1151
Dual ±15V Zero-Drift
Operational Amplifier
FEATURES
■Maximum Offset Voltage Drift: 0.05µV/°C
■High Voltage Operation: ±18V
â– No External Components Required
■Maximum Offset Voltage: 5µV
■Low Noise: 1.5µVP-P (0.1Hz to 10Hz)
â– Minimum Voltage Gain: 125dB
â– Minimum CMRR: 106dB
â– Minimum PSRR: 110dB
â– Low Supply Current: 0.9mA/Amplifier
â– Single Supply Operation: 4.75V to 36V
â– Input Common Mode Range Includes Ground
â– Typical Overload Recovery Time: 20ms
â– Available in 8-Lead N8 and 16-Lead SW Packages
U
APPLICATIO S
â– Strain Gauge Amplifiers
â– Instrumentation Amplifiers
â– Electronic Scales
â– Medical Instrumentation
â– Thermocouple Amplifiers
â– High Resolution Data Acquisition
DESCRIPTIO
The LTC®1151 is a high voltage, high performance dual
zero-drift operational amplifier. The two sample-and-hold
capacitors per amplifier required externally by other chop-
per amplifiers are integrated on-chip. The LTC1151 also
incorporates proprietary high voltage CMOS structures
which allow operation at up to 36V total supply voltage.
The LTC1151 has a typical offset voltage of 0.5µV,
drift of 0.01µV/°C, 0.1Hz to 10Hz input noise voltage of
1.5µVP-P, and a typical voltage gain of 140dB. It has a slew
rate of 3V/µs and a gain-bandwidth product of 2.5MHz
with a supply current of 0.9mA per amplifier. Overload
recovery times from positive and negative saturation are
3ms and 20ms, respectively.
The LTC1151 is available in a standard 8-lead plastic DIP
package as well as a 16-lead wide body SO. The LTC1151
is pin compatible with industry-standard dual op amps
and runs from standard ±15V supplies, allowing it to plug
in to most standard bipolar op amp sockets while offering
significant improvement in DC performance.
, LTC and LT are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
TYPICAL APPLICATIO
±15V Dual Thermocouple Amplifier
51Ω 100Ω*
240k
15V
15V
VIN K 7
LT1025
VO 3
GND R–
45
470k
–+
TYPE K
0.1µF
6– 8
1/2
7
2k
LTC1151
5+
51Ω 100Ω*
240k
–15V
–+
2–
0.1µF
1/2
1
2k
LTC1151
3+
4
TYPE K
* FULL SCALE TRIM: TRIM FOR 10.0V OUTPUT
WITH THERMOCOUPLE AT 100°C
–15V
0.1µF
0.1µF
OUTPUT A
100mV/°C
OUTPUT B
100mV/°C
1151 TA01
Noise Spectrum
60
50
40
30
20
10
0
1
10
100
1k
10k
FREQUENCY (Hz)
1151 TA02
1151fa
1