LT1084CK(RevC) Ver la hoja de datos (PDF) - Linear Technology
Número de pieza
componentes Descripción
Fabricante
LT1084CK Datasheet PDF : 16 Pages
| |||
LT1083/LT1084/LT1085
7.5A, 5A, 3A Low Dropout
Positive Adjustable Regulators
FEATURES
s Three-Terminal Adjustable
s Output Current of 3A, 5A or 7.5A
s Operates Down to 1V Dropout
s Guaranteed Dropout Voltage at Multiple Current Levels
s Line Regulation: 0.015%
s Load Regulation: 0.01%
s 100% Thermal Limit Functional Test
s Fixed Versions Available
U
APPLICATIONS
s High Efficiency Linear Regulators
s Post Regulators for Switching Supplies
s Constant Current Regulators
s Battery Chargers
DEVICE
OUTPUT CURRENT*
LT1083
7.5A
LT1084
5.0A
LT1085
3.0A
*For a 1.5A low dropout regulator see the LT1086 data sheet.
DESCRIPTION
The LT1083 series of positive adjustable regulators are
designed to provide 7.5A, 5A and 3A with higher efficiency
than currently available devices. All internal circuitry is
designed to operate down to 1V input-to-output differen-
tial and the dropout voltage is fully specified as a function
of load current. Dropout is guaranteed at a maximum of
1.5V at maximum output current, decreasing at lower load
currents. On-chip trimming adjusts the reference voltage
to 1%. Current limit is also trimmed, minimizing the stress
on both the regulator and power source circuitry under
overload conditions.
The LT1083/LT1084/LT1085 devices are pin compatible
with older three-terminal regulators. A 10µF output ca-
pacitor is required on these new devices. However, this is
included in most regulator designs.
Unlike PNP regulators, where up to 10% of the output
current is wasted as quiescent current, the LT1083 quies-
cent current flows into the load, increasing efficiency.
TYPICAL APPLICATION
5V, 7.5A Regulator
VIN ≥ 6.5V
+
IN
10µF
LT1083 OUT
ADJ
*REQUIRED FOR STABILITY
121Ω
1% +
365Ω
1%
5V AT 7.5A
10µF*
TANTALUM
1083/4/5 ADJ TA01
Dropout Voltage vs Output Current
2
1
0
0
IFULL LOAD
OUTPUT CURRENT
1083/4/5 ADJ TA02
1
Share Link: 