LPC2290 Ver la hoja de datos (PDF) - Philips Electronics
Número de pieza
componentes Descripción
Fabricante
LPC2290
Philips Electronics
LPC2290 Datasheet PDF : 41 Pages
| |||
Philips Semiconductors
LPC2290
16/32-bit ARM microcontrollers with external memory interface
5.2 Pin description
Table 3: Pin description
Symbol
Pin
Type
P0.0 to P0.31
42, 49, 50, I/O
58, 59, 61,
68, 69, 75,
76, 78,
83-85, 92,
99, 100, 101,
121-123, 4-6,
8, 21, 23, 25,
3, 2, 33
P0.0
42
O
O
P0.1
49
I
O
I
P0.2
50
I/O
I
P0.3
58
I/O
O
I
P0.4
59
I/O
I
P0.5
61
I/O
O
P0.6
68
I/O
I
P0.7
69
I
O
I
P0.8
75
O
O
P0.9
76
I
O
I
P0.10
78
O
I
Description
Port 0: Port 0 is a 32-bit bi-directional I/O port with individual direction
controls for each bit. The operation of port 0 pins depends upon the pin
function selected via the Pin Connect Block.
Pins 26 and 31 of port 0 are not available.
TxD0 — Transmitter output for UART0.
PWM1 — Pulse Width Modulator output 1.
RxD0 — Receiver input for UART0.
PWM3 — Pulse Width Modulator output 3.
EINT0 — External interrupt 0 input
SCL — I2C clock input/output. Open drain output (for I2C compliance).
CAP0.0 — Capture input for Timer0, channel 0.
SDA — I2C data input/output. Open drain output (for I2C compliance).
MAT0.0 — Match output for Timer0, channel 0.
EINT1 — External interrupt 1 input.
SCK0 — Serial clock for SPI0. SPI clock output from master or input to slave.
CAP0.1 — Capture input for Timer0, channel 1.
MISO0 — Master In Slave OUT for SPI0. Data input to SPI master or data
output from SPI slave.
MAT0.1 — Match output for Timer0, channel 1.
MOSI0 — Master Out Slave In for SPI0. Data output from SPI master or data
input to SPI slave.
CAP0.2 — Capture input for Timer0, channel 2.
SSEL0 — Slave Select for SPI0. Selects the SPI interface as a slave.
PWM2 — Pulse Width Modulator output 2.
EINT2 — External interrupt 2 input.
TxD1 — Transmitter output for UART1.
PWM4 — Pulse Width Modulator output 4.
RxD1 — Receiver input for UART1.
PWM6 — Pulse Width Modulator output 6.
EINT3 — External interrupt 3 input.
RTS1 — Request to Send output for UART1.
CAP1.0 — Capture input for Timer1, channel 0.
9397 750 12874
Preliminary data
Rev. 01 — 09 February 2004
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
5 of 41
Share Link: