LM2935D2T Ver la hoja de datos (PDF) - ON Semiconductor
Número de pieza
componentes Descripción
Fabricante
LM2935D2T Datasheet PDF : 8 Pages
| |||
ON Semiconductort
Low Dropout
Dual Voltage Regulator
The LM2935 is a dual positive 5.0 V low dropout voltage regulator,
designed for standby power systems. The main output is capable of
supplying 750 mA for microprocessor power, and can be turned “on”
and “off” by the switch/reset input. The other output is dedicated for
standby operation of volatile memory, and is capable of supplying up
to 10 mA loads. The total device features a low quiescent current of
3.0 mA or less when supplying 10 mA from the standby output.
This part was designed for harsh automotive environments and is
therefore immune to many input supply voltage problems such as
reverse battery (–12 V), double battery (+24 V), and load dump
transients (+60 V).
• Two Regulated 5.0 V Outputs
• Main Output Current in Excess of 750 mA
• On/Off Control of Main Output
• Standby Output Current in Excess of 10 mA
• Low Input/Output Differential of Less than 0.6 V at 500 mA
• Short Circuit Current Limiting
• Internal Thermal Shutdown
• Low Voltage Indicator Output
• Designed for Automotive Environment Including
• Reverse Battery Protection
• Double Battery Protection
• Load Dump Protection
• Reverse Transient Protection
• Economical 5–Lead TO–220 Package with Two Optional Leadforms
• Also Available in Surface Mount D2PAK Package
LM2935
LOW DROPOUT
DUAL VOLTAGE REGULATOR
SEMICONDUCTOR
TECHNICAL DATA
TH SUFFIX
PLASTIC PACKAGE
CASE 314A
1
5
1
5
TV SUFFIX
PLASTIC PACKAGE
CASE 314B
Heatsink surface connected to Pin 3.
T SUFFIX
PLASTIC PACKAGE
CASE 314D
1
5
Device
LM2935D2T
LM2935T
LM2935TH
LM2935TV
ORDERING INFORMATION
Operating
Temperature Range
Package
Surface Mount
TJ = –40° to +125°C
Plastic Power
Horizontal Mount
Vertical Mount
Pin 1. Input Voltage/VCC
2. Main Output
3. Ground
4. Switch/Reset
5. Standby/Output
1
5
D2T SUFFIX
PLASTIC PACKAGE
CASE 936A
(D2PAK)
Heatsink surface (shown as terminal 6
in case outline drawing) is connected to Pin 3.
© Semiconductor Components Industries, LLC, 2001
1
April, 2001 – Rev. 2
Publication Order Number:
LM2935/D
Share Link: 