LC750 Ver la hoja de datos (PDF) - Unspecified
Número de pieza
componentes Descripción
Fabricante
LC750 Datasheet PDF : 10 Pages
| |||
Installation Instructions
Patient Care Unit with Standard Laminate or Optional Terreon® Top
LC700, LC750
Installation Instructions continued . . .
Step 9: Reinstall and adjust the door linkage
1. Reinstall the door linkage by loosely fastening the door linkage rod with the supplied nut onto
the linkage bracket (see Figure 18).
2. Close the door. If the water closet contacts the back wall before the door closes, adjust the door
linkage by turning the door linkage rod so that the door closes before the water closet comes in
contact with the back wall (see Figure 18). If no adjustment is needed, tighten the nut securely
on the linkage bracket.
NOTE: The linkage arm has a factory-set length. When the door linkage is fastened to the linkage
bracket, the door will open 110 degrees. If the PATIENT CARE UNIT is installed against a corner
wall, make sure the door does not come in contact with the wall, or the water closet does not come in
contact with the back wall when the door is opened or closed. Make adjustments, if necessary, and
refer to Figure 18 with inset.
3. After the adjustments are made, tighten the nut securely on the linkage arm.
Figure 18
DOOR
LINKAGE
ARM
LINKAGE
BRACKET
DOOR
2nd hole for 110 °
opening
3rd hole for 90 °
opening
Bradley Corporation • 215-1171 Rev. D; EN 04-1037
8/16/04
9
Share Link: 