LC750 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

LC750

Patient Care Unit with Standard Laminate or Optional Terreon® Lavatory Top

Unspecified 

Patient Care Unit with Standard Laminate or Optional Terreon® Top

LC700, LC750

Installation Instructions

Installation Instructions continued . . .

Step 7: Completing Installation

1. Connect the flush valve water supply pipe to the flush valve 1" NPT inlet.

2. Install the strainer and tailpiece.

3. Install the P-trap (supplied by installer) to the sink drain, then connect the P-trap to the drain

pipe (piping supplied by installer).

Step 8: Reinstall the cabinet floor and back panel

1. Reinstall the cabinet floor and secure it to the cabinet frame with the two screws provided (see

Figure 16).

NOTE FOR OPTIONAL FOOT VALVE: The outlet hose must be positioned in the cabinet floor cutout

as shown in Figure 16.

2. Lay the trim piece around the base of the water closet on the cabinet floor (see Figure 16).

3. Using silicone caulk (supplied by installer), caulk between the trim piece and cabinet floor, and

caulk the gap between the pedestal and trim piece (see Figure 16).

4. Reinstall the back panel by bringing the sliding back panel in from the front of the module and

sliding the back panel into place.

5. Secure the back panel by sliding the back panel onto the frame corner (see Figure 17).

PEDESTAL

TO SPOUT

TRIM

PIECE

SLIDING BACK

PANEL

STATIONARY

BACK PLATE

PANEL

CLIP

FOOT PEDAL

OUTLET HOSE

Figure 16

8

CAULK

CABINET FLOOR

CABINET FLOOR

SCREWS

TRIM

PIECE

CABINET

FLOOR

Figure 17

8/16/04

Bradley Corporation • 215-1171 Rev. D; EN 04-1037

Share Link: