LC750 Ver la hoja de datos (PDF) - Unspecified
Número de pieza
componentes Descripción
Fabricante
LC750 Datasheet PDF : 10 Pages
| |||
Installation Instructions
Patient Care Unit with Standard Laminate or Optional Terreon® Top
LC700, LC750
Installation Instructions continued . . .
Step 5a: Install the optional
Terreon® lavatory top
1. Apply a bead of silicone caulk around
the outer top edge of the cabinet and
between the lavatory top and the wall.
2. Set the lavatory top in place on the
cabinet making sure the back and wall
sides are flush with the edge of the
cabinet (see Figure 12).
3. Clean up any excess caulk.
Step 6: Install faucet and connect
water supply
BEAD OF
CAULK
Figure 12
BEAD OF
CAULK
FOOT VALVE MODELS (see Figures 13 and 14)
1. Place the faucet onto the countertop, gently inserting the faucet
supply shank through the hole provided in the lavatory bowl.
2. Using the washer and wingnut provided, mount the faucet to the
countertop by tightening the wingnut on the faucet's supply
shank.
3. Connect the flexible supply hose provided from the foot pedal
valve to the supply shank.
4. Connect the hot and cold water supply (piping supplied by
installer) to the 1/2†NPT inlet connectors on the foot valve (see
Figure 14).
FAUCET VALVE MODELS (see Figure 15)
Figure 13
GOOSENECK
SPOUT
LAVATORY
BOWL
SUPPLY
SHANK
SUPPLY
HOSE
1. Place the faucet onto the countertop, gently inserting the faucet supply shanks through the
holes provided in the lavatory bowl.
2. Using the washers and wingnuts provided, mount
the faucet to the countertop by tightening the
wingnut on the faucet's supply shanks.
3. Connect the hot and cold water supply (piping
FOOT VALVE
OUTLET
CONNECTION
SUPPLY
HOSE
HOT
INLET
COLD
INLET
supplied by installer) to the 1/2†NPT inlet
connectors on the foot valve.
Figure 15
LAVATORY
BOWL
FOOT VALVE
INLET
CONNECTORS
FOOT
VALVE
Figure 14
1/2†NPT
HOT INLET
COUNTERTOP
WASHER
WINGNUT
1/2†NPT
COLD INLET
Bradley Corporation • 215-1171 Rev. D; EN 04-1037
8/16/04
7
Share Link: 