L6374 Ver la hoja de datos (PDF) - STMicroelectronics
Número de pieza
componentes Descripción
Fabricante
L6374 Datasheet PDF : 19 Pages
| |||
L6374
Industrial quad line driver
Features
■ Four independent line drivers with 100 mA up
to 35 V outputs
■ Input signals between - 7 V and + 35 V, with
pre-setting threshold
■ Push-pull outputs with three state control and
true zero current between Vs and ground
■ Current limiting on each output effective in the
full "ground to Vs" output voltage range
■ Output voltage clamp to Vs and to ground
■ Overtemperature and undervoltage protections
■ Diagnostic for overtemperature, undervoltage
and overcurrent
■ Pre-setting delay for overcurrent diagnostic
■ High speed operation: up to 300 kHz with 35 V
swing
Figure 1. Block diagram
SO-20
Description
The L6374 is especially designed to be used as a
line driver in industrial control systems based on
the 24 V signal levels (IEC 61131, 24VDC).
Table 1. Device summary
Order codes
Package
L6374FP
SO-20
L6374FPT
SO-20
Packaging
Tube
Tape and reel
March 2008
Rev 3
1/19
www.st.com
19
Share Link: 