DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

KYL-300H-12 Ver la hoja de datos (PDF) - SHENZHEN KYL COMMUNICATION EQUIPMENT CO,LTD.

Número de pieza
componentes Descripción
Fabricante
KYL-300H-12
KYL
SHENZHEN KYL COMMUNICATION EQUIPMENT CO,LTD. KYL
KYL-300H-12 Datasheet PDF : 9 Pages
1 2 3 4 5 6 7 8 9
Shenzhen KYL Communication Equipment Co., Ltd
II. Applications of KYL-300H
KYL-300H is suitable for:
* Automatic Meter Reading (AMR);
* Wireless alarm and security systems;
* Building automation, security systems, wireless monitor, remote control and access
control system;
* Wireless data transmission, automatic data collection system;
* Radio modem can be used for Sports training & competition;
* Wireless dishes ordering;
* Wireless POS, PDA wireless smart terminal;
* RF module can be used for electronic bus station and intelligent traffics;
* RF transmitter, Wireless electronic display screen and Queuing machine;
* Wireless telemetry; charging for parking, parking lot;
* Wireless modem automobile inspection and four-wheel orientation;
* Wireless sensor, Industrial wireless remote control and air conditioning remote
controller;
* Data communication in the aspects of railway, oil field, dock and army.
* LED display in thruway and public place;
* Point to multi-point wireless network, wireless on-the-spot bus and automatic data
collection system
III. How to use KYL-300H
KYL-300H can provides RS-232,RS-485 and TTL level interface port for direct connection
with PC, RS485 devices, monolithic processors. The schematic diagram is shown below:
1. Power supply
The factory default setting is +12, ±1.2V DC. By using better ripple factor, KYL-300H
transceivers can also share power supply with other equipment. If possible, a
voltage-stabilizing chip with 12V voltage is much more recommended than Switch
power supply. But if only switch power supply available, the jam caused by switch
pulse to the transceivers should be avoided. In addition, the reliable grounding must be
used if there is other device in the system equipment. In case of failing to connect with
the ground, it can form its own grounding but must be absolutely separated from the
municipal electric supply.
Fax: +86-755-82943662
sales02@rf-data.com
www.rf-data.com 3

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]