DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

KYL-210-12 Ver la hoja de datos (PDF) - SHENZHEN KYL COMMUNICATION EQUIPMENT CO,LTD.

Número de pieza
componentes Descripción
Fabricante
KYL-210-12
KYL
SHENZHEN KYL COMMUNICATION EQUIPMENT CO,LTD. KYL
KYL-210-12 Datasheet PDF : 9 Pages
1 2 3 4 5 6 7 8 9
Shenzhen KYL Communication Equipment Co., Ltd
III: Application of KYL-210:
KYL-210 is suitable for:
* Automatic Meter Reading (AMR);
* Wireless alarm and security systems;
* Building automation, security systems, wireless monitor, remote control and
access control system;
* Wireless data transmission, automatic data collection system;
* Radio modem can be used for Sports training & competition;
* Wireless dishes ordering;
* Wireless POS, PDA wireless smart terminal;
* RF module can be used for electronic bus station and intelligent traffics;
* RF transmitter, Wireless electronic display screen and Queuing machine;
* Wireless telemetry; charging for parking, parking lot;
* Wireless modem automobile inspection and four-wheel orientation;
* Wireless sensor, Industrial wireless remote control and air conditioning remote
controller;
* Data communication in the aspects of railway, oil field, dock and army.
* LED display in thruway and public place;
* Point to multi-point wireless network, wireless on-the-spot bus and automatic
data collection system
IV: How to use the KYL-210
KYL-210 provide RS-232, RS-485 and UART/TTL level interface ports which can
be direct connected with PC, RS485 devices, monolithic processors and other
UART components. Please find the schematic diagram below:
1. Power supply
The factory setting is +5V (needing 3.3V-3.6V, please notify us when placing the
order). Using better ripple factor, KYL-210 transceivers can also share power
supply with other equipment. If possible, a voltage-stabilizing chip with 5V voltage
is much recommended than Switch power supply. But if only switch power supply
is available, the jam caused by switch pulse should be avoided. In addition, the
reliable grounding must be used if there is other device in the system equipment. In
case of failing to connect with the ground, it can form its own grounding but must
be absolutely separated from the municipal electric supply.
Fax: +86-755-83408785
sales02@rf-data.com
www.rf-data.com

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]