IXDN402PI Ver la hoja de datos (PDF) - IXYS CORPORATION

Número de pieza

componentes Descripción

Fabricante

IXDN402PI

2 Ampere Dual Low-Side Ultrafast MOSFET Drivers

IXYS CORPORATION 

IXDN402 / IXDI402 / IXDF402

Pin Description

SYMBOL

IN A

FUNCTION

A Channel Input

GND

Ground

IN B

OUT B

B Channel Input

B Channel Output

VCC

Supply Voltage

OUT A

A Channel Output

DESCRIPTION

A Channel Input signal-TTL or CMOS compatible.

The system ground pin. Internally connected to all circuitry, this pin provides

ground reference for the entire chip. This pin should be connected to a low

noise analog ground plane for optimum performance.

B Channel Input signal-TTL or CMOS compatible.

B Channel Driver output. For application purposes, this pin is connected via

a resistor to a gate of a MOSFET/IGBT.

Positive power-supply voltage input. This pin provides power to the entire

chip. The range for this voltage is from 4.5V to 25V.

A Channel Driver output. For application purposes, this pin is connected via

a resistor to a gate of a MOSFET/IGBT.

CAUTION: These devices are sensitive to electrostatic discharge; follow proper ESD procedures when

handling and assembling this component.

Note 1: Operating the device beyond the parameters listed as “Absolute Maximum Ratings” may cause permanent

damage to the device. Typical values indicate conditions for which the device is intended to be functional, but do not

guarantee specific performance limits. The guaranteed specifications apply only for the test conditions listed.

Exposure to absolute maximum rated conditions for extended periods may affect device reliability.

Figure 4 - Characteristics Test Diagram

Vcc

10uF

25V

1 NC

2 In A

3 Gnd

4 In B

NC 8

Out A 7

Vcc 6

Out B 5

Agilent 1147A

Current Probe

1000 pF

Agilent 1147A

Current Probe

1000 pF

4

Share Link: