IL4116-X016 Ver la hoja de datos (PDF) - Vishay Semiconductors

Número de pieza

componentes Descripción

Fabricante

IL4116-X016

Optocoupler, Phototriac Output, Zero Crossing, Very Low Input Current

Vishay Semiconductors 

IL4116, IL4117, IL4118

Vishay Semiconductors

Optocoupler, Phototriac Output, Zero Crossing,

Very Low Input Current

A1

6 MT2

C2

5 NC

21842-1

NC 3 ZCC*

4 MT1

*Zero crossing circuit

i179030_4

DVE

DESCRIPTION

The IL4116, IL4117, and IL4118 consists of an AlGaAs IRLED

optically coupled to a photosensitive zero crossing TRIAC

network. The TRIAC consists of two inverse parallel connected

monolithic SCRs. These three semiconductors devices are

assembled in a six pin 300 mil dual in-line package.

High input sensitivity is achieved by using an emitter follower

phototransistor and a cascaded SCR predriver resulting in an

LED trigger current of less than 1.3 mA (DC).

The IL4116, IL4117, IL4118 uses zero cross line voltage

detection circuit witch consists of two enhancement MOSFETs

and a photodiode. The inhibit voltage of the network is

determined by the enhancement voltage of the n-channel FET.

The P-channel FET is enabled by a photocurrent source that

permits the FET to conduct the main voltage to gate on the

n-channel FET. Once the main voltage can enable the n-channel,

it clamps the base of the phototransistor, disabling the first stage

SCR predriver.

The blocking voltage of up to 800 V permits control of off-line

voltages up to 240 VAC, with a safety factor of more than two, and

is sufficient for as much as 380 VAC. Current handling capability

is up to 300 mA RMS continuous at 25 °C.

The IL4116, IL4117, IL4118 isolates low-voltage logic from

120 VAC, 240 VAC, and 380 VAC lines to control resistive,

inductive, or capacitive loads including motors, solenoids, high

current thyristors or TRIAC and relays.

Applications include solid-state relays, industrial controls, office

equipment, and consumer appliances.

FEATURES

• High input sensitivity: IFT = 1.3 mA, PF = 1.0;

IFT = 3.5 mA, typical PF < 1.0

• Zero voltage crossing

• 600 V, 700 V, and 800 V blocking voltage

• 300 mA on-state current

• High dV/dt 10 000 V/μs

• Isolation test voltage 5300 VRMS

• Very low leakage < 10 μA

• Compliant to RoHS Directive 2002/95/EC and in

accordance to WEEE 2002/96/EC

APPLICATIONS

• Solid state relay

• Lighting controls

• Temperature controls

• Solenoid/valte controls

• AC motor drives/starters

AGENCY APPROVALS

• UL1577, file no. E52744 system code H or J, double

protection

• CSA 93751

• BSI IEC60950; IEC60065

• DIN EN 60747-5-5 (VDE 0884) available with option 1

• FIMKO

ORDERING INFORMATION

I

L

4

1

1

#

-

X

0

#

#

T

DIP

Option 6

PART NUMBER

PACKAGE OPTION

TAPE AND

REEL

7.62 mm

Option 7

10.16 mm

Option 9

AGENCY CERTIFIED/PACKAGE

UL, cUL, BSI, FIMKO

DIP-6

DIP-6, 400 mil, option 6

SMD-6, option 7

SMD-6, option 9

VDE, UL, cUL, BSI, FIMKO

DIP-6

DIP-6, 400 mil, option 6

SMD-6, option 7

SMD-6, option 9

Note

(1) Also available in tubes, do not put T on the end.

600

IL4116

IL4116-X006

IL4116-X007T (1)

IL4116-X009T (1)

600

IL4116-X001

IL4116-X016

-

IL4116-X019T (1)

> 0.7 mm

BLOCKING VOLTAGE VDRM (V)

700

> 0.1 mm

800

IL4117

IL4118

-

IL4118-X006

IL4117-X007

IL4118-X007T (1)

-

IL4118-X009T (1)

700

800

IL4117-X001

IL4118-X001

-

IL4118-X016

-

IL4118-X017

-

-

Document Number: 83628

Rev. 1.8, 20-Oct-10

For technical questions, contact: optocoupleranswers@vishay.com

www.vishay.com

1

Share Link: