ICL2001-23 Ver la hoja de datos (PDF) - IC MICROSYSTEMS
Número de pieza
componentes Descripción
Fabricante
ICL2001-23 Datasheet PDF : 6 Pages
| |||
!
Pin #
1
2
3
4
5
6
Symbol
Bias Ctrl
Gnd
RFin
Vcc
Gnd
RFout
Description
Bias resistor of appropriate value connected to this pin externally controls the bias
current in the circuit and thus the gain.
Ground connection. Keep traces physically short and immediately connect to ground
plane.
RF input pin. This pin is not internally DC blocked and thus requires an external blocking
capacitor suitable for the frequency of operation.
Bias should be supplied to this pin externally. Please note that an RF choke inductor is
required. The supply should be well-bypassed.
Same as Pin 1
RF output pin. This pin is not internally DC blocked and thus requires an external
blocking capacitor suitable for the frequency of operation.
$
"
Symbol
VCC
TOP
TSTG
TSOL
Parameter
Positive Power Supply
Operating Temperature
Storage Temperature
Soldering Temperature
Value
+4.0
-40 to +85
-65 to +150
300
Unit
VDC
oC
oC
oC
Note: Stress greater than those listed above may cause permanent
damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those
indicated in the operational sections of this specification is not implied.
Exposure to absolute maximum rating conditions for extended periods
may affect reliability.
!
"
Part
ICL2001-23
ICL2001-23-EVAL
Description
6L-SOT23, 3V LNA
Fully Assembled Evaluation Board
!
Parameter Value
Unit
VCC
+3.0
VDC
TOP
+25
oC
Unless otherwise stated, measurements were done on the
evaluation board
%&'()* ! +), '-+ !+- +
Appropriate precaution in handling,
packaging and testing must be
observed
Rev. 1.0
ICmic reserves the right to change the specifications without notice.
2
28/12/04
For more information please visit http://www.icmic.com
Share Link: 