IZ8005
l. When beep sound is on for 4 sec, the temperature is not measured.
• When “Power OFF” type standby current is 0.3 mkA.
• The frequency of the buzzer is 4kHz or 8kHz by pin option.
• Fever alarm is pin option.
• Measurement to 0.01 degree at °C.
• Sensor use 503ET.
• Reference resistor is the value (sensor in 37.00°C)
• The low battery and “M” flag cannot display when the temperature shows Hi or Lo.
• When battery voltage is low, the battery mark “N” flashes at a speed of 1Hz and the
measurement may not be accurate. The low voltage detect: 1.35V ± 0.05V.
• During the process of mass production, in order to adjust the reference resistance (RF), let test 2
be floating, the measured temperature will be the actual temperature of the measured environment. It can be
up or down, not always the higher one.
Flow Chart
5