HPP801A031 Ver la hoja de datos (PDF) - Humirel

Número de pieza

componentes Descripción

Fabricante

HPP801A031

RELATIVE HUMIDITY SENSOR

Humirel 

QUALIFICATION PROCESS

HS1101LF sensors have been qualified through a complete qualification process taking in account many

of the requirements of the JEDEC standard including:

• Solder heat and solderability including lead

free process.

• Pb free wave soldering and reflow

soldering process(260°C) + DI water clean

at 45°C

• Mechanical shock JESD-22-B104-A

• Vibration - Variable frequency(20 to

2000Hz) JESD-22-B103-A

• Marking permanency

• ESD - Electrostatic Discharge –Air Gun +-

15kV(IEC 1000)

• Salt Atmosphere JESD22-A107-A

• Temperature Cycling - 40°C / +125°C

• High Temperature / Humidity Operating

Life - 93%RH / 60°C for 1000 hours

• Low Humidity storage life - RH < 10%/23°C

- 1000 hours

• Resistance to immersion in water at

ambient temperature and 80°C

• High temperature storage 140°C for 168

hours.

• Resistance to many chemicals linked to

home appliances/automotive or consumer

applications.

ENVIRONMENTAL AND RECYCLING

HS1101LF sensors are lead free components and are compatible with Pb Free soldering processes.

PACKAGE OUTLINE

Dimensions in millimeters

To distinguish HS1101 from HS1101LF, HS1101LF is designed with a black plastic cap

ORDERING INFORMATION:

HS1101LF: HPP801A031 (MULTIPLE PACKAGE QUANTITY OF 48 PIECES)

CAPACITIVE RELATIVE HUMIDITY SENSOR.

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsability is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer.

Humirel reserves the right to make changes without further notice to any product herein. Humirel makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Humirel assume any liability arising out of the application or

use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. « Typical » parameters can and do vary in different applications. All operating parameters, including « Typical » must be validated for each

customer applications by customer’s technical experts. Humirel does not convey any license under its patent rights nor the rights of others. Humirel products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or

other application intended to support or sustain life, or for any application in which the failure of the Humirel product could create a situation where personal injury or death may occur. Should buyer purchase or use Humirel products for any such unintended or unauthorized

application, Buyer shall indemnify and hold Humirel and its officers, employees, subsidaries, affiliates and distributors

harmless against all claims, costs, damages and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of presonal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Humirel was negligent regarding the

design or manufacture of the part.Humirel is a registred trade mark of Humirel.

HUMIREL HPC052 Rev.E April 2007

TECHNICAL 4 DATA

HS1101LF

Share Link: