HIP6601BCBZ Ver la hoja de datos (PDF) - Intersil
Número de pieza
componentes Descripción
Fabricante
HIP6601BCBZ Datasheet PDF : 12 Pages
| |||
HIP6601B, HIP6603B, HIP6604B
Absolute Maximum Ratings
Supply Voltage (VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15V
Supply Voltage (PVCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC + 0.3V
BOOT Voltage (VBOOT - VPHASE). . . . . . . . . . . . . . . . . . . . . . . . . . . .15V
Input Voltage (VPWM) . . . . . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V to 7V
UGATE . . . . . . . . . . VPHASE - 5V(<400ns pulse width) to VBOOT + 0.3V
. . . . . . . . . . . . . . . VPHASE -0.3V(>400ns pulse width) to VBOOT + 0.3V
LGATE . . . . . . . . . . . . . GND - 5V(<400ns pulse width) to VPVCC + 0.3V
. . . . . . . . . . . . . . . . . . GND -0.3V(>400ns pulse width) to VPVCC + 0.3V
PHASE . . . . . . . . . . . . . . . . . . . . . . GND -5V(<400ns pulse width) to 15V
. . . . . . . . . . . . . . . . . . . . . . . . . . .GND -0.3V(>400ns pulse width) to 15V
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7). . . . . . . . .3kV
Machine Model (Per EIAJ ED-4701 Method C-111) . . . . . . . . . . . .200V
Thermal Information
Thermal Resistance
θJA (°C/W) θJC (°C/W)
SOIC Package (Note 3). . . . . . . . . . . . . . . .
97
N/A
EPSOIC Package (Note 4) . . . . . . . . . . . . .
38
N/A
QFN Package (Notes 4, 5) . . . . . . . . . . . . .
48
10
Maximum Junction Temperature (Plastic Package) . . . . . . . . . . . . . 150°C
Maximum Storage Temperature Range . . . . . . . . . . . . . . . .-65°C to 150°C
Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
For Recommended soldering conditions see Tech Brief TB389.
Operating Conditions
Ambient Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 85°C
Maximum Operating Junction Temperature . . . . . . . . . . . . . . . . . . . 125°C
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V ±10%
Supply Voltage Range, PVCC . . . . . . . . . . . . . . . . . . . . . . . . . . .5V to 12V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
3. θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
4. θJA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
5. For θJC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications
Recommended Operating Conditions, Unless Otherwise Noted. Boldface limits apply over the operating temperature
range, 0°C to +85°C
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
MAX
(Note 6) TYP (Note 6) UNITS
VCC SUPPLY CURRENT
Bias Supply Current
Upper Gate Bias Current
POWER-ON RESET
IVCC
IPVCC
HIP6601B, fPWM = 1MHz, VPVCC = 12V
HIP6603B, fPWM = 1MHz, VPVCC = 12V
HIP6601B, fPWM = 1MHz, VPVCC = 12V
HIP6603B, fPWM = 1MHz, VPVCC = 12V
-
4.4
6.2
mA
-
2.5
3.6
mA
-
200
430
μA
-
1.8
3.3
mA
VCC Rising Threshold
9.7
9.95 10.4
V
VCC Falling Threshold
7.3
7.6
8.0
V
PWM INPUT
Input Current
IPWM VPWM = 0V or 5V (See “Block Diagrams” on
-
500
-
μA
page 2)
PWM Rising Threshold
-
3.6
-
V
PWM Falling Threshold
-
1.45
-
V
UGATE Rise Time
LGATE Rise Time
UGATE Fall Time
LGATE Fall Time
UGATE Turn-Off Propagation Delay
LGATE Turn-Off Propagation Delay
Shutdown Window
tRUGATE VPVCC = 12V, 3nF Load
tRLGATE VPVCC = 12V, 3nF Load
tFUGATE VPVCC = 12V, 3nF Load
tFLGATE VPVCC = 12V, 3nF Load
tPDLUGATE VPVCC = 12V, 3nF Load
tPDLLGATE VPVCC = 12V, 3nF Load
-
20
-
ns
-
50
-
ns
-
20
-
ns
-
20
-
ns
-
30
-
ns
-
20
-
ns
1.4
-
3.6
V
Shutdown Holdoff Time
-
230
-
ns
4
FN9072.8
May 1, 2012
Share Link: 