HIN202 Ver la hoja de datos (PDF) - Intersil

Número de pieza

componentes Descripción

Fabricante

HIN202

+5V Powered RS-232 Transmitters/Receivers with 0.1Microfarad External Capacitors

Intersil 

HIN202, HIN206, HIN207, HIN208, HIN211, HIN213

Pin Descriptions

PIN

VCC

V+

V-

GND

C1+

C1-

C2+

C2-

TIN

TOUT

RIN

ROUT

EN, EN

SD, SD

FUNCTION

Power Supply Input 5V ±10%, (5V ±5% HIN207).

Internally generated positive supply (+10V nominal).

Internally generated negative supply (-10V nominal).

Ground Lead. Connect to 0V.

External capacitor (+ terminal) is connected to this lead.

External capacitor (- terminal) is connected to this lead.

External capacitor (+ terminal) is connected to this lead.

External capacitor (- terminal) is connected to this lead.

Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400kΩ pull-up resistor to VCC is connected to each lead.

Transmitter Outputs. These are RS-232 levels (nominally ±10V).

Receiver Inputs. These inputs accept RS-232 input levels. An internal 5kΩ pull-down resistor to GND is connected to each input.

Receiver Outputs. These are TTL/CMOS levels.

Receiver enable Input. With EN = 5V (HIN213 EN = 0V), the receiver outputs are placed in a high impedance state.

Shutdown Input. With SD = 5V (HIN213 SD = 0V), the charge pump is disabled, the receiver outputs are in a high impedance state

(except R4 and R5 of HIN213) and the transmitters are shut off.

NC

No Connect. No connections are made to these leads.

3

Share Link: