GS9020A Ver la hoja de datos (PDF) - Gennum -> Semtech
Número de pieza
componentes Descripción
Fabricante
GS9020A Datasheet PDF : 31 Pages
| |||
PIN CONNECTIONS
VDD
GND
GND
VDD
VDDSDI
SDI
SDI
VDDSDI
VDDSCI
SCI
SCI
VDDSCI
VDD
GND
HOSTIF_MODE
FIFOE/S
CRC_MODE
P7
P6
P5
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61
1
60
2
59
3
58
4
57
5
56
6
55
7
54
8
53
9
GS9020A
52
10
TOP VIEW
51
11
50
12
49
13
48
14
47
15
46
16
45
17
44
18
43
19
42
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41
DOUT9
DOUT8
DOUT7
DOUT6
DOUT5
DOUT4
DOUT3
DOUT2
DOUT1
VDD
GND
DOUT0
PCLKOUT
FIFO_RESET
NO_EDH
FLYWDIS
INTERRUPT
F_R/W
S0
S1
PIN DESCRIPTIONS
NUMBER
SYMBOL
TYPE
DESCRIPTION
6, 7
SDI, SDI
I
Differential serial data inputs.
10, 11
SCI, SCI
I
Differential serial clock inputs.
15
HOSTIF_MODE
I
Host interface mode select. When HIGH, the host interface is configured for I²C mode. When
LOW, the host interface is configured for parallel port mode.
16
FIFOE/S
I
FIFO_RESET pulse control. When HIGH, the output FIFO_RESET pulse occurs on the EAV
word. When LOW, the output FIFO_RESET pulse occurs on the SAV word.
17
CRC_MODE
I
CRC_MODE enable. When HIGH, CRC_MODE is enabled. When LOW, CRC_MODE is
disabled.
18 - 20
P[7:5]
I/O In parallel port mode, these are bits 7:5 of the host interface address/data bus. In I²C mode,
these pins must be set LOW.
21
SCL/P4
I/O In parallel port mode, this is bit 4 of the host interface address/data bus. In I²C mode, this is the
serial clock input for the I²C port.
22
SDA/P3
I/O In parallel port mode, this is bit 3 of the host interface address/data bus. In I²C mode, this is the
serial data pin for the I²C port.
23 - 25
A[2:0]/P[2:0]
I/O In parallel port mode, these are bits 2:0 of the host interface address/data bus. In I²C mode,
these are input bits which define the I²C slave address for the device.
26
R/W
I
Parallel port read/write control. When HIGH, the parallel port is configured as an output (read
mode). When LOW, the parallel port is configured as an input (write mode). In I²C mode, this
pin must be set HIGH.
5 of 31
19922 - 3
Share Link: 