CA3140 Ver la hoja de datos (PDF) - Intersil

Número de pieza

componentes Descripción

Fabricante

CA3140

4.5MHz, BiMOS operational amplifier with MOSFET input/bipolar output

Intersil 

®

Data Sheet

CA3140, CA3140A

November 2002

FN957.7

4.5MHz, BiMOS Operational Amplifier with

MOSFET Input/Bipolar Output

The CA3140A and CA3140 are integrated circuit operational

amplifiers that combine the advantages of high voltage

PMOS transistors with high voltage bipolar transistors on a

single monolithic chip.

The CA3140A and CA3140 BiMOS operational amplifiers

feature gate protected MOSFET (PMOS) transistors in the

input circuit to provide very high input impedance, very low

input current, and high speed performance. The CA3140A

and CA3140 operate at supply voltage from 4V to 36V

(either single or dual supply). These operational amplifiers

are internally phase compensated to achieve stable

operation in unity gain follower operation, and additionally,

have access terminal for a supplementary external capacitor

if additional frequency roll-off is desired. Terminals are also

provided for use in applications requiring input offset voltage

nulling. The use of PMOS field effect transistors in the input

stage results in common mode input voltage capability down

to 0.5V below the negative supply terminal, an important

attribute for single supply applications. The output stage

uses bipolar transistors and includes built-in protection

against damage from load terminal short circuiting to either

supply rail or to ground.

The CA3140A and CA3140 are intended for operation at

supply voltages up to 36V (±18V).

Ordering Information

PART NUMBER

(BRAND)

CA3140AE

CA3140AM

(3140A)

CA3140E

TEMP.

RANGE (oC)

PACKAGE

-55 to 125 8 Ld PDIP

-55 to 125 8 Ld SOIC

-55 to 125 8 Ld PDIP

PKG.

NO.

E8.3

M8.15

E8.3

CA3140M

(3140)

CA3140M96

(3140)

-55 to 125 8 Ld SOIC

M8.15

-55 to 125 8 Ld SOIC Tape and Reel

Features

• MOSFET Input Stage

- Very High Input Impedance (ZIN) -1.5TΩ (Typ)

- Very Low Input Current (Il) -10pA (Typ) at ±15V

- Wide Common Mode Input Voltage Range (VlCR) - Can

be Swung 0.5V Below Negative Supply Voltage Rail

- Output Swing Complements Input Common Mode

Range

• Directly Replaces Industry Type 741 in Most

• Applications

Applications

• Ground-Referenced Single Supply Amplifiers in

Automobile and Portable Instrumentation

• Sample and Hold Amplifiers

• Long Duration Timers/Multivibrators

(µseconds-Minutes-Hours)

• Photocurrent Instrumentation

• Peak Detectors

• Active Filters

• Comparators

• Interface in 5V TTL Systems and Other Low

Supply Voltage Systems

• All Standard Operational Amplifier Applications

• Function Generators

• Tone Controls

• Power Supplies

• Portable Instruments

• Intrusion Alarm Systems

Pinout

CA3140 (PDIP, SOIC)

TOP VIEW

OFFSET

NULL

1

INV. INPUT 2

-

NON-INV.

INPUT

3

+

V- 4

8 STROBE

7 V+

6 OUTPUT

5

OFFSET

NULL

1

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.

1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.

Copyright © Intersil Americas Inc. 2002. All Rights Reserved

All other trademarks mentioned are the property of their respective owners.

Share Link: