GL831A-MSGXX Ver la hoja de datos (PDF) - Genesys Logic

Número de pieza

componentes Descripción

Fabricante

GL831A-MSGXX

USB 2.0 to SATA Bridge Controller

Genesys Logic 

GL831A Datasheet

CHAPTER 1 GENERAL DESCRIPTION

The GL831A is a highly-compatible, low cost SATA to PATA and PATA to SATA bridge controller, which

integrates Genesys Logic own design Serial ATA PHY. As a one-chip solution which complies with Serial ATA

specification rev. 2.6 and ATA / ATAPI-6 specification rev 1.0, the GL831A can support various kinds of ATA /

ATAPI device in SATA to PATA and SATA device in PATA to SATA. The GL831A uses 25MHz crystal and

slew-rate controlled pads to reduce the EMI issue. With 64-pin LQFP (7X7mm) package, the GL831A is the

best cost/ performance solution for SATA to PATA and PATA to SATA application.

©2009 Genesys Logic, Inc. - All rights reserved.

Page 6

Share Link: