GL830-MXGXX Ver la hoja de datos (PDF) - Genesys Logic

Número de pieza

componentes Descripción

Fabricante

GL830-MXGXX

USB 2.0 to SATA Bridge Controller

Genesys Logic 

GL830 USB2.0 to SATA Bridge Controller

CHAPTER 1 GENERAL DESCRIPTION

The GL830 is a highly-compatible, low cost USB 2.0 to SATA bridge controller, which integrates Genesys

Logic own design high speed UTMI (USB 2.0 Transceiver Macrocell Interface) transceiver/receiver and Serial

ATA PHY. As a one-chip solution which complies with Universal Serial Bus specification rev. 2.0 and Serial

ATA specification rev. 2.6. There are totally 4 endpoints in the GL830 controller, Control (0), Bulk In (1), Bulk

Out (2), and Interrupt (3). By complies with the USB Storage Class specification ver.1.0 (Bulk only protocol),

the GL830 can support not only plug and play but also Windows Vista/ XP/ 2000/ ME default driver. The

GL830 uses 25MHz crystal and slew-rate controlled pads to reduce the EMI issue. With 64-pin LQFP

(7mmX7mm) package, the GL830 is the best cost/ performance solution to fit different situations in the USB 2.0

high speed storage class applications such as SATA HDD and ODD.

©2007 Genesys Logic Inc. - All rights reserved.

Page 8

Share Link: