STLVDS104(2006) Ver la hoja de datos (PDF) - STMicroelectronics

Número de pieza

componentes Descripción

Fabricante

STLVDS104
(Rev.:2006)

4-port lvds and 4-port TTL-to LVDS repeaters

STMicroelectronics 

STLVDS104

4-port lvds and 4-port TTL-to LVDS repeaters

Feature summary

I Receiver and drivers meet or exceed the

requirements of ansi eia/tia-644 standard,

receivers differential input levels, ±100mV

I Designed for signaling rates up to 630mbps

I Operates from a single 3.3V supply

I Low voltage differential signaling with typical

output voltage of 350mV and a 100Ω load

I Propagation delay time: 3.1ns (typ)

I Electrically compatible with LVDS, PECL,

LVPECL, LVTTL, LVCOMOS, GTL, BTL, CTT,

SSTL, or HSTL outputs with external network

I Bus terminal ESD (HBM) exceeds 7kV

I TSSOP package

Description

The STLVDS104 is a differential line receiver and

a LVTTL input connected to four differential line

drivers that implement the electrical

characteristics of low voltage differential

signaling, for point to point baseband data

transmission over controlled impedance media of

approximately 100Ω. The transmission media can

be printed-circuit board traces, backplanes, or

cable.

LVDS, as specified in EIA/TIA-644 is a data

signaling technique that offers low-power, low

TSSOP

noise coupling, and switching speed to transmit

data at a speed up to 630Mbps at relatively long

distances.

The drivers integrated into the same substrate,

along with the low pulse skew of balanced

signaling, allow extremely precise timing

alignment of the signals repeated from the input.

The device allows extremely precise timing

alignment of the signal repeated from the input.

This is particularly advantageous in distribution or

expansion of signals such as clock or serial data

stream.

.

Order codes

Type

STLVDS104BTR

March 2006

Temperature

Range

-40 to 85 °C

Package

TSSOP16 (Tape & Reel)

Rev. 5

Comments

2500 parts per reel

1/12

www.st.com

12

Share Link: