FH36-33S-0.3SHW Ver la hoja de datos (PDF) - HIROSE ELECTRIC

Número de pieza

componentes Descripción

Fabricante

FH36-33S-0.3SHW

0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors

HIROSE ELECTRIC 

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH36 Seriesq0.3 mm Pitch, 1.0 mm above the board Flexible Printed Circuit ZIF Connectors

sOperation and Precautions

Operation

1. FPC insertion procedure. Connector installed on the board.

1 Lift up the actuator.

Use thumb or index finger.

2 Insert the FPC (contact surfaces facing down) at angle of

approximately 10° to the board surface ①, making sure that

the FPC positioning tabs clear the protrusions on both sides

of the connector. Lower the FPC down ②, parallel to the

board surface.

3 Rotate down the actuator until firmly closed.

FPC contact surface

faces downward

①

②

Protrusions for

the FPC positioning.

2. FPC removal

1 Lift up the actuator

Pull up the FPC at an angle of approximately 10° ① and than with-

drew it from the connector ②.

125°

②

①

Protrusions for FPC positioning

8

Share Link: