EM78P5841 Ver la hoja de datos (PDF) - ELAN Microelectronics

Número de pieza

componentes Descripción

Fabricante

EM78P5841

8-BIT MICRO-CONTROLLER

ELAN Microelectronics 

EM78P5840/5841/5842

8-bit Micro-controller

RA

PAGE0

7

6

5

4

3

RAB7 RAB6 BAB5 RAB4

-

R/W-0 R/W-0

R-1 R/W-1

2

RAB2

R

1

RAB1

R-0

0

RAB0

R/W

Bit type

read/write

(default value=0)

read/write

(default value=1)

read only

(w/o default value)

read/write

(w/o default value)

Bit name

Bit number

read only

(undefined) not allowed to use

read only

Register name and its page

(default value=1)

(default value=0)

3. Always set IOCC PAGE1 bit 0 = 1 otherwise partial ADC function cannot be used (in ICE5830).

4. Please do not switch MCU operation mode from normal mode to sleep mode directly. Before

into sleep mode, please switch MCU to green mode.

5. While switching main clock (regardless of high freq to low freq or on the other hand), adding 6

instructions delay (NOP) is required.

6. Offset voltage will effect ADC’s result, please refer to figure 19 to detail.

7. Please do not connect unnecessary circuit on OTP burner pins during burning the OTP ROM.

__________________________________________________________________________________________________________________________________________________________________

* This specification is subject to change without notice.

2

2004/11/10 V2.6

Share Link: