ELJ-940-629 Ver la hoja de datos (PDF) - EPIGAP optoelectronic GmbH

Número de pieza

componentes Descripción

Fabricante

ELJ-940-629

Jumbo-LED

EPIGAP optoelectronic GmbH 

Jumbo-LED

ELJ-940-629

16.11.2007

rev. 04

Remarks concerning optical radiation safety*

Up to a forward current of 300 mA, at continuous operation, this LED may be classified as LED

product Class 1 , according to standard IEC 60825-1:A2. Class 1 products are safe to eyes and skin

under reasonably predictable conditions. This implicates a direct observation of the light beam by

means of optical instruments.

If intended to operate at higher continuous current, this product should be classified as LED product

Class 1M , according to standard IEC 60825-1:A2. Class 1M products are safe to eyes and skin

under normal conditions, including when users view the light beam directly. Class 1M products

produce either a highly divergent beam or a large diameter beam. Therefore only a small part of the

whole laser beam can enter the eye. However, these laser products can be harmful to the retina if the

beam is viewed using magnifying optical instruments. Therefore, users should not incorporate optics

that could concentrate the output into the eyes.

*Note: Safety classification of an optical component mainly depends on the intended application and

the way the component is being used. Furthermore, all statements made to classification are based

on calculations and are only valid for this LED "as it is", and at continuous operation. Using pulsed

current or altering the light beam with additional optics may lead to different safety classifications.

Therefore these remarks should be taken as recommendation and guideline only.

We reserve the right to make changes to improve technical design and may do so without further notice.

Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer.

EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201

Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545

4 of 5

Share Link: