EL8108 Ver la hoja de datos (PDF) - Intersil

Número de pieza

componentes Descripción

Fabricante

EL8108

Video Distribution Amplifier

Intersil 

EL8108

Absolute Maximum Ratings (TA = +25°C)

VS+ Voltage to Ground . . . . . . . . . . . . . . . . . . . . . . -0.3V to +13.2V

VIN+ Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND to VS+

Current into any Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8mA

Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . 75mA

Thermal Information

Ambient Operating Temperature Range . . . . . . . . . .-40°C to +85°C

Storage Temperature Range . . . . . . . . . . . . . . . . . .-60°C to +150°C

Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +150°C

Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves

Pb-free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . .see link below

http://www.intersil.com/pbfree/Pb-FreeReflow.asp

CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and

result in failures not covered by warranty.

IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests

are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA

Electrical Specifications VS = 12V, RF = 750Ω, RL = 100Ω connected to mid supply, TA = +25°C, unless otherwise specified.

PARAMETER

DESCRIPTION

CONDITIONS

MIN TYP MAX UNIT

AC PERFORMANCE

BW

-3dB Bandwidth

HD

Total Harmonic Distortion, Differential

SR

Slew Rate, Single-ended

DC PERFORMANCE

RF = 500Ω, AV = +2

RF = 500Ω, AV = +4

f = 200kHz, VO = 16VP-P, RL = 50Ω

f = 4MHz, VO = 2VP-P, RL = 100Ω

f = 8MHz, VO = 2VP-P, RL = 100Ω

f = 16MHz, VO = 2VP-P, RL = 100Ω

VOUT from -3V to +3V

200

MHz

150

MHz

-72

-83

dBc

-70

dBc

-60

dBc

-50

dBc

600 800 1100 V/µs

VOS

Offset Voltage

ΔVOS

VOS Mismatch

ROL

Transimpedance

INPUT CHARACTERISTICS

VOUT from -4.5V to +4.5V

-25

+25 mV

-3

+3

mV

0.7

1.4

2.5

MΩ

IB+

Non-inverting Input Bias Current

IB-

Inverting Input Bias Current

ΔIB-

IB- Mismatch

eN

Input Noise Voltage

iN

-Input Noise Current

OUTPUT CHARACTERISTICS

-5

5

µA

-20

5

+20

µA

-18

0

+18

µA

6

nV√ Hz

13

pA/√ Hz

VOUT

IOUT

SUPPLY

Loaded Output Swing (Single-ended)

Output Current

VS = ±6V, RL = 100Ω to GND

VS = ±6V, RL = 25Ω to GND

RL = 0Ω

±4.8

±5

V

±4.7

V

450

mA

VS

Supply Voltage

IS (EL8108IS only) Supply Current, Maximum Setting

SUPPLY (EL8108IL ONLY)

Single supply

All outputs at mid supply

4.5

13

V

11

14.3

18

mA

IS+ (Full Power)

Positive Supply Current per Amplifier

IS+ (Medium Power) Positive Supply Current per Amplifier

IS+ (Low Power) Positive Supply Current per Amplifier

IS+ (Power Down) Positive Supply Current per Amplifier

IINH, C0 or C1

C0, C1 Input Current, High

IINL, C0 or C1

C0, C1 Input Current, Low

All outputs at 0V, C0 = C1 = 0V

All outputs at 0V, C0 = 5V, C1 = 0V

All outputs at 0V, C0 = 0V, C1 = 5V

All outputs at 0V, C0 = C1 = 5V

C0, C1 = 5V

C0, C1 = 0V

11

14.3

18

mA

7

8.9

11

mA

3.7

4.5

5.5

mA

0.1

0.5

mA

90

125 160

µA

-5

+5

µA

3

FN7417.2

January 29, 2008

Share Link: