ECG002 Ver la hoja de datos (PDF) - WJ Communications => Triquint

Número de pieza

componentes Descripción

Fabricante

ECG002

InGaP HBT Gain Block

WJ Communications => Triquint 

ECG002

InGaP HBT Gain Block

ECG002C-G Mechanical Information

This package is lead-free/Green/RoHS-compliant. The plating material on the pins is annealed matte tin over copper. It is compatible with

both lead-free (maximum 260 °C reflow temperature) and leaded (maximum 245 °C reflow temperature) soldering processes.

Outline Drawing

Product Marking

The component will be marked with a two-

digit numeric lot code (shown as “XX”)

followed with a “K” designator on the top

surface of the package. The obsolete tin-lead

package is marked with a two-digit numeric

lot code followed with a “J” designator; it

may also have been marked with a “J”

designator followed by a two-digit lot code.

Tape and reel specifications for this part are

located on the website in the “Application

Notes” section.

MSL / ESD Rating

Land Pattern

ESD Rating: Class 1A

Value:

Passes between 250 and 500V

Test:

Human Body Model (HBM)

Standard: JEDEC Standard JESD22-A114

MSL Rating: Level 3 at +260 °C convection reflow

Standard: JEDEC Standard J-STD-020

Mounting Config. Notes

1. Ground / thermal vias are critical for the proper performance of

this device. Vias should use a .35mm (#80 / .0135”) diameter

drill and have a final plated thru diameter of .25 mm (.010”).

2. Add as much copper as possible to inner and outer layers near

the part to ensure optimal thermal performance.

3. Mounting screws can be added near the part to fasten the board

to a heatsink. Ensure that the ground / thermal via region

contacts the heatsink.

4. Do not put solder mask on the backside of the PC board in the

region where the board contacts the heatsink.

5. RF trace width depends upon the PC board material and

construction.

6. Use 1 oz. Copper minimum.

7. All dimensions are in millimeters (inches). Angles are in

degrees.

Thermal Specifications

Parameter

Operating Case Temperature

Thermal Resistance, Rth

Rating

-40 to +85 °C

233 °C/W

Specifications and information are subject to change without notice

WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-577-6621 • e-mail: sales@wj.com • Web site: www.wj.com

Page 5 of 7 April 2007

Share Link: