E24SR12005NKFA Ver la hoja de datos (PDF) - Delta Electronics, Inc.

Número de pieza

componentes Descripción

Fabricante

E24SR12005NKFA

Delphi Series E24SR, 66W Eighth Brick Family DC/DC Power Modules: 24V in, 12V/5A out

Delta Electronics, Inc. 

FEATURES DESCRIPTIONS (CON.)

Output Voltage Adjustment (TRIM)

To increase or decrease the output voltage set point,

connect an external resistor between the TRIM pin and

either the SENSE(+) or SENSE(-). The TRIM pin

should be left open if this feature is not used.

Figure 18: Circuit configuration for trim-down (decrease

output voltage)

If the external resistor is connected between the TRIM

and SENSE (-) pins, the output voltage set point

decreases (Fig. 18). The external resistor value

required to obtain a percentage of output voltage

change △% is defined as:

Rtrim

−

down

=

⎡ 511

⎢⎣ ∆

− 10.2⎥⎦⎤(KΩ )

Ex. When Trim-down -10% (12V×0.9=10.8V)

Rtrim

−

down

=

⎡ 511

⎢⎣ 10

− 10.2⎥⎦⎤(KΩ ) =

40 .9(KΩ )

Figure 19: Circuit configuration for trim-up (increase output

voltage)

If the external resistor is connected between the TRIM

and SENSE (+) the output voltage set point increases

(Fig. 19). The external resistor value required to obtain

a percentage output voltage change △% is defined

as:

Rtrim − up = 5.11Vo (100 + ∆ ) − 511 − 10 .2(K Ω )

1.225 ∆

∆

Ex. When Trim-up +10% (12V×1.1=13.2V)

Rtrim − up = 5.11×12 × (100 +10) − 511 −10.2 = 489.3(KΩ)

1.225 ×10

10

The output voltage can be increased by both the remote

sense and the trim, however the maximum increase is

the larger of either the remote sense or the trim, not the

sum of both.

When using remote sense and trim, the output voltage

of the module is usually increased, which increases the

power output of the module with the same output

current.

Care should be taken to ensure that the maximum

output power of the module remains at or below the

maximum rated power.

DS_E24SR12005_ 01182007

9

Share Link: