ILX514 Ver la hoja de datos (PDF) - Sony Semiconductor
Número de pieza
componentes Descripción
Fabricante
ILX514 Datasheet PDF : 15 Pages
| |||
ILX514
Electro-optical Characteristics (Note 1)
(Ta = 25°C, VDD1 = 9V, VDD2 = 5V, φCLK = 1MHz, Internal φRS mode without S/H,
Light source = 3200K, IR cut filter, CM-500S (t = 1.0mm))
Item
Symbol
Sensitivity 1
R1
Sensitivity 2
R2
Sensitivity nonuniformity
PRNU
Saturation output voltage
VSAT
Saturation exposure
SE
Even and odd black level DC difference ∆V
Dark voltage average
VDRK
Dark signal nonuniformity
DSNU
Image lag
IL
9V supply current
IVDD1
5V supply current
IVDD2
Total transfer efficiency
TTE
Output impedance
ZO
Offset level
VOS
Dynamic range
DR
Min.
7.5
—
—
1.0
0.072
—
—
—
—
—
—
92
—
—
500
Typ.
10.8
24.6
4
1.5
0.139
1.0
0.3
0.6
0.02
16
2.1
98
600
3.0
5000
Max.
13.9
—
10
—
—
10
2
3
—
32
5.0
—
—
—
—
Unit
V/(lx · s)
V/(lx · s)
%
V
lx · s
mV
mV
mV
%
mA
mA
%
Ω
V
—
Remarks
Note 2
Note 3
Note 4
Note 5
Note 6
Note 7
Note 8
Note 9
Note 10
—
—
—
—
Note 11
Note 12
Notes)
1) In accordance with the given electrooptical characteristics, the even black level is defined as the mean
value of D8, D10, D12 and D14.
The odd black level is defined as the mean value of D7 , D9, D11 and D13.
2) For the sensitivity test light is applied with a uniform intensity of illumination.
3) W lamp (2854K)
4) PRNU is defined as indicated below. Ray incidence conditions are the same as for Note 2.
PRNU = (VMAX – VMIN)/2 × 100 [%]
VAVE
Where the 3918 pixels are divided into blocks of 98, even and odd pixels, respectively (Even and odd last
blocks are 97). The maximum output of each block is set to VMAX, the minimum output to VMIN and the
average output to VAVE.
5) Use below the minimum value of the saturation output voltage.
6) Saturation exposure is defined as follows.
VSAT
SE = R1
7) Indicates the DC difference in value between odd black level and even black level.
8) Optical signal accumulated time τ int stands at 10ms.
–5–
Share Link: 