DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

DS3231 Ver la hoja de datos (PDF) - Dallas Semiconductor -> Maxim Integrated

Número de pieza
componentes Descripción
Fabricante
DS3231
Dallas
Dallas Semiconductor -> Maxim Integrated Dallas
DS3231 Datasheet PDF : 19 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Extremely Accurate I2C-Integrated
RTC/TCXO/Crystal
Data Transfer on I2C Serial Bus
SDA
tBUF
SCL
STOP
START
tLOW
tHD:STA
tR
tF
tHD:STA
tHD:DAT
tHIGH
tSU:DAT
tSU:STA
REPEATED
START
tSP
tSU:STO
Note 1: Limits at -40°C are guaranteed by design and not production tested.
Note 2: All voltages are referenced to ground.
Note 3: ICCA—SCL clocking at max frequency = 400kHz.
Note 4: Current is the averaged input current, which includes the temperature conversion current.
Note 5: The RST pin has an internal 50k(nominal) pullup resistor to VCC.
Note 6: After this period, the first clock pulse is generated.
Note 7: A device must internally provide a hold time of at least 300ns for the SDA signal (referred to the VIH(MIN) of the SCL signal)
to bridge the undefined region of the falling edge of SCL.
Note 8: The maximum tHD:DAT needs only to be met if the device does not stretch the low period (tLOW) of the SCL signal.
Note 9: A fast-mode device can be used in a standard-mode system, but the requirement tSU:DAT 250ns must then be met. This
is automatically the case if the device does not stretch the low period of the SCL signal. If such a device does stretch the
low period of the SCL signal, it must output the next data bit to the SDA line tR(MAX) + tSU:DAT = 1000 + 250 = 1250ns
before the SCL line is released.
Note 10: CB—total capacitance of one bus line in pF.
Note 11: The parameter tOSF is the period of time the oscillator must be stopped for the OSF flag to be set over the voltage range of
0.0V VCC VCC(MAX) and 2.3V VBAT 3.4V.
Note 12: This delay applies only if the oscillator is enabled and running. If the EOSC bit is a 1, the startup time of the oscillator is
added to this delay.
6 _____________________________________________________________________

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]