GLT4160L16-35TC Ver la hoja de datos (PDF) - G-Link Technology
Número de pieza
componentes Descripción
Fabricante
GLT4160L16-35TC Datasheet PDF : 16 Pages
| |||
G-LINK
GLT4160L16
1M X 16 CMOS DYNAMIC RAM WITH EXTENDED DATA OUTPUT
Mar 2000 (Rev.2.0)
DC and Operating Characteristics (1-2)
TA = 0°C to 70°C, VCC=3.3V±0.3V, VSS=0V, unless otherwise specified.
Sym. Parameter
Test Conditions
Access
Time
ILI Input Leakage Current 0V ≤ VIN ≤ Vcc+0.3V
(any input pin)
(All other pins not under test=0V)
ILO Output Leakage Current 0V ≤ Vout ≤ Vcc
(for High-Z State)
Output is disabled (Hiz)
ICC1 Operating Current,
Random READ/WRITE tRC = tRC (min.)
ICC2 Standby Current,(TTL) RAS , UCAS , LCAS at VIH
other inputs ≥VSS
ICC3 Refresh Current,
RAS cycling, UCAS , LCAS at VIH
RAS -Only
tRC = tRC (min.)
ICC4 Operating Current,
EDO Page Mode
RAS at VIL, UCAS , LCAS address
cycling:tPC=tPC(min.)
ICC5 Refresh Current,
CAS Before RAS
ICC6 Standby Current,
(CMOS)
RAS , UCAS , LCAS
address cycling:
tRC=tRC (min.)
RAS ≥VCC-0.2V,
tRAC = 35ns
tRAC = 40ns
tRAC = 50ns
tRAC = 60ns
tRAC = 35ns
tRAC = 40ns
tRAC = 50ns
tRAC = 60ns
tRAC = 35ns
tRAC = 40ns
tRAC = 50ns
tRAC = 60ns
tRAC = 35ns
tRAC = 40ns
tRAC = 50ns
tRAC = 60ns
UCAS ≥VCC-0.2V,
ICC7 Self Refresh Current
LCAS ≥VCC-0.2V,
All other inputs VSS
RAS = UCAS = LCAS =VIL
Min. Typ
-5
-5
Max.
+5
+5
170
160
150
140
1
170
160
150
140
170
160
150
140
170
160
150
140
0.5
200
Unit Notes
µA
µA
mA 1,2
mA
mA 2
mA 1,2
mA 1
mA 1
µA 1,5
VIL Input Low Voltage
VIH Input High Voltage
VOL Output Low Voltage
VOH Output High Voltage
WE = OE =A0~A9=VCC-0.2V or 0.2V
DQ0~DQ15=VCC-0.2V,0.2V or Open
IOL = 2mA
IOH = -2mA
200 µA
-0.3
+0.8 V
3
2.0
VCC+0.3 V
3
0.4 V
2.4
V
Notes:
1.ICC is dependent on output loading when the device output is selected. Specified ICC(max.) is measured with the output open.
2.ICC is dependent upon the number of address transitions specified ICC(max.) is measured with a maximum of one transition per address cycle in
random Read/Write and EDO Fast Page Mode.
3.Specified VIL(min.) is steady state operation. During transitions VIL(min.) may undershoot to -1.0V for a period not to exceed 15ns. All AC
parameters are measured with VIL(min.)≥VSS and VIH(max.)≤VCC.
4.Specified VIH(max.) is steady state operation. During transitions VIH(max.) may undershoot to +1.0V for a period not to exceed 15ns. All AC
parameters are measured with VIL(min.)≥VSS and VIH(max.)≤VCC.
5.S-Version.
G-Link Technology Corporation
2701Northwestern Parkway
Santa Clara, CA 95051, U.S.A.
-4-
G-Link Technology Corporation,Taiwan
6F, No. 24-2, Industry E. RD. IV, Science Based
Industrial Park, Hsin Chu, Taiwan.
Share Link: 