DF61-2S-13C Ver la hoja de datos (PDF) - HIROSE ELECTRIC

Número de pieza

componentes Descripción

Fabricante

DF61-2S-13C

Board-to-Wire Swing-Lock Connector for Low-Profile Power Source

HIROSE ELECTRIC 

DF61 Series●Board-to-Wire Swing-Lock Connector for Low-Profile Power Source

7. Mating/Un-mating

Mating Operation

(1) Start by placing the connector against the

header lock at an angle. If the plug is not

started at an angle, it will cause damage

to the connector.

Header Lock

(2) Then, in a slight, rotating

movement, push the front

section of the plug down.

Lever

Un-mating Operation

(3) Keep pressing down until a “click” feeling

is sensed. The connector is now fully

and properly mated.

Friction Lock

Reinforced Lock

Click Feel

(1) Begin by lifting up on the front section of

the plug.

(2) Continue to rotate it upwards

and release the friction lock

portion.

(3) Once the rear, or reinforced lock, is released the plug will come free from the header

and complete the un-mating sequence.

®

6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: +81-45-620-3526 Fax: +81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

8

The contents of this catalog are current as of date of 04/2013. Contents are subject to change without notice for the purpose of improvements.

Share Link: