CNY17. Ver la hoja de datos (PDF) - Vishay Semiconductors
Número de pieza
componentes Descripción
Fabricante
CNY17. Datasheet PDF : 8 Pages
| |||
Alternative Device Available, Use CNY17
www.vishay.com
CNY17., CNY17G
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
COUPLER
Isolation test voltage
between emitter and detector referred to
climate DIN 50014, part 2, Nov. 74
t = 1 min
VISO
5000
VRMS
Creepage distance (CNY17.)
≥7
mm
Clearance distance (CNY17.)
≥7
mm
Creepage distance (CNY17G)
≥8
mm
Clearance distance (CNY17G)
≥8
mm
Isolation thickness between
emitter and detector
≥ 0.4
mm
Comparative tracking index
per DIN IEC 112/VDE 0303, part 1
250
Isolation resistance
Storage temperature
Operating temperature
Soldering temperature (1)
VIO = 500 V, Tamb = 25 °C
RIO
≥ 1012
Ω
VIO = 500 V, Tamb = 100 °C
RIO
≥ 1011
Ω
Tstg
- 55 to + 125
°C
Tamb
- 55 to + 100
°C
max. 10 s, dip soldering: distance to
seating plane ≥ 1.5 mm
Tsld
260
°C
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) Refer to wave profile for soldering conditions for through hole devices.
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART SYMBOL MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
Breakdown voltage
Reverse current
Capacitance
Thermal resistance
OUTPUT
IF = 60 mA
IR = 10 μA
VR = 6 V
VR = 0 V, f = 1 MHz
VF
1.25
1.65
V
VBR
6
V
IR
0.01
10
μA
CO
25
pF
Rth
750
K/W
Collector emitter capacitance
VCE = 5 V, f = 1 MHz
CCE
5.2
pF
Collector base capacitance
VCB = 5 V, f = 1 MHz
CCB
6.5
pF
Emitter base capacitance
VEB = 5 V, f = 1 MHz
CEB
7.5
pF
Thermal resistance
Rth
500
K/W
COUPLER
Collector emitter, saturation voltage
Coupling capacitance
Collector emitter, leakage current
IF = 10 mA, IC = 2.5 mA
VCE = 10 V
CNY17-1
CNY17-2
CNY17-3
CNY17-4
VCEsat
CC
ICEO
ICEO
ICEO
ICEO
0.25
0.4
V
0.6
pF
2
50
nA
2
50
nA
5
100
nA
5
100
nA
Note
• Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
Rev. 1.6, 17-Feb-14
2
Document Number: 81863
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Share Link: 