CM2030 Ver la hoja de datos (PDF) - California Micro Devices Corp

Número de pieza

componentes Descripción

Fabricante

CM2030

HDMI Transmitter Port Protection and Interface Device

California Micro Devices Corp 

CM2030

PIN DESCRIPTIONS (CONTINUED)

38

3, 5, 8, 11,

14, 25,

28, 31, 34,

36

5V_OUT

GND / TMDS_GND

8kV3

N/A

55mA minimum overcurrent protected 5V output. This output must be

bypassed with a 0.1μF ceramic capacitor.

GND reference.

Note 1: These 2 pins need to be connected together in-line on the PCB. See recommended layout diagram.

Note 2: This output can be connected to an external 0.1μF ceramic capacitor/pads to maintain backward compatibility with the

CM2020.

Note 3: Standard IEC 61000-4-2, CDISCHARGE=150pF, RDISCHARGE=330Ω, 5V_SUPPLY and LV_SUPPLY within recommended

operating conditions, GND=0V, 5V_OUT (pin 38), and HOTPLUG_DET_OUT (pin 20) each bypassed with a 0.1μF ceramic

capacitor connected to GND.

Note 4: Human Body Model per MIL-STD-883, Method 3015, CDISCHARGE=100pF, RDISCHARGE=1.5kΩ, 5V_SUPPLYand

LV_SUPPLY within recommended operating conditions, GND=0V, 5V_OUT (pin 38), and HOTPLUG_DET_OUT (pin 20)

each bypassed with a 0.1μF ceramic capacitor connected to GND.

Note 5: These pins should be routed directly to the associated GND pins on the HDMI connector with single point ground vias at the

connector.

Note 6: The slew-rate control and active acceleration circuitry dynamically offsets the system capacitive load on these pins.

© 2007 California Micro Devices Corp. All rights reserved.

490 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: 408.263.3214 ● Fax: 408.263.7846 ● www.cmd.com

3

Issue A – 11/16/07

Share Link: