CM1230-08CS Ver la hoja de datos (PDF) - California Micro Devices Corp
Número de pieza
componentes Descripción
Fabricante
CM1230-08CS Datasheet PDF : 11 Pages
| |||
PRELIMINARY
CM1230
Specifications
PARAMETER
Operating Supply Voltage (VP - VN)
Operating Temperature Range
Storage Temperature Range
DC Voltage at any channel input
ABSOLUTE MAXIMUM RATINGS
RATING
6.0
-40 to +85
-65 to +150
(VN - 0.5) to (VP + 0.5)
UNITS
V
°C
°C
V
PARAMETER
Operating Temperature Range
STANDARD OPERATING CONDITIONS
RATING
-40 to +85
UNITS
°C
ELECTRICAL OPERATING CHARACTERISTICS(SEE NOTE 1)
SYMBOL
VP
IP
VF
ILEAK
PARAMETER
Operating Supply Voltage (VP-VN)
Operating Supply Current
Diode Forward Voltage
Top Diode
Bottom Diode
Channel Leakage Current
CIN
Channel Input Capacitance
ΔCIN Channel Input Capacitance Matching
CMUTUAL
VESD
VCL
Mutual Capacitance between signal
pin and adjacent signal pin
In-system ESD Protection
Peak Discharge Voltage at any
channel input, in system
a) Contact discharge per
IEC 61000-4-2 standard
b) Human Body Model, MIL-
STD-883, Method 3015
Channel Clamp Voltage
Positive Transients
Negative Transients
CONDITIONS
(VP-VN)=3.3V
IF = 8mA; TA=25°C
TA=25°C; VP=5V, VN=0V,
VIN = 0V to 5V
At 1 MHz, VP=3.3V, VN=0V,
VIN=1.65V; Note 2 applies
At 1 MHz, VP=3.3V, VN=0V,
VIN=1.65V; Note 2 applies
At 1 MHz, VP=3.3V, VN=0V,
VIN=1.65V; Note 2 applies
Notes 2, 4 & 5; TA=25°C
Notes 2, 3 & 5; TA=25°C
TA=25°C, IPP = 1A, tP = 8/20μS;
Notes 2, & 5
MIN TYP MAX
3.3
5.5
8.0
0.60 0.80 0.95
0.60 0.80 0.95
±0.1 ±1.0
0.8 1.20
0.02
0.15
±8
±15
+9.8
-1.8
RDYN
Dynamic Resistance
Positive Transients
Negative Transients
IPP = 1A, tP = 8/20μS
Any I/O pin to Ground; Note 2 and 5
0.76
0.56
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
Note 6:
All parameters specified at TA = -40°C to +85°C unless otherwise noted.
These parameters guaranteed by design and characterization.
Human Body Model per MIL-STD-883, Method 3015, CDischarge = 100pF, RDischarge = 1.5KΩ, VP = 3.3V, VN grounded.
Standard IEC 61000-4-2 with CDischarge = 150pF, RDischarge = 330Ω, VP = 3.3V, VN grounded.
These measurements performed with no external capacitor on VP.
Measured under pulsed conditions, pulse width = 0.7ms, maximum current = 1.5A.
UNITS
V
μA
V
V
μA
pF
pF
pF
kV
kV
V
V
Ω
Ω
© 2006 California Micro Devices Corp. All rights reserved.
4
490 N. McCarthy Blvd., Milpitas, CA 95035-5112 ● Tel: 408.263.3214 ● Fax: 408.263.7846 ● www.cmd.com 03/15/06
Share Link: 