C8051F040-DK Ver la hoja de datos (PDF) - Silicon Laboratories

Número de pieza

componentes Descripción

Fabricante

C8051F040-DK

C8051F04X DEVELOPMENT KIT USER’S GUIDE

Silicon Laboratories 

C8051F04x-DK

C8051F04X DEVELOPMENT KIT USER’S GUIDE

1. Kit Contents

The C8051F04x Development Kit contains the following items:

• Two C8051F040 Target Boards

• C8051Fxxx Development Kit Quick-Start Guide

• Silicon Laboratories IDE and Product Information CD-ROM. CD content includes:

• Silicon Laboratories Integrated Development Environment (IDE)

• Keil 8051 Development Tools (macro assembler, linker, evaluation ‘C’ compiler)

• Source code examples and register definition files

• Documentation

• C8051F04x Development Kit User’s Guide (this document)

• Two AC to DC Power Adapters

• CAN Cable (DB-9 connectors)

• USB Debug Adapter (USB to Debug Interface)

• USB Cable

2. Hardware Setup using a USB Debug Adapter

The target board is connected to a PC running the Silicon Laboratories IDE via the USB Debug Adapter as shown

in Figure 1.

1. Connect the USB Debug Adapter to the JTAG connector on the target board with the 10-pin ribbon cable.

2. Connect one end of the USB cable to the USB connector on the USB Debug Adapter.

3. Connect the other end of the USB cable to a USB Port on the PC.

4. Connect the ac/dc power adapter to power jack P1 on the target board.

Notes:

• Use the Reset button in the IDE to reset the target when connected using a USB Debug Adapter.

• Remove power from the target board and the USB Debug Adapter before connecting or disconnecting the

ribbon cable from the target board. Connecting or disconnecting the cable when the devices have power can

damage the device and/or the USB Debug Adapter.

AC/DC

PC

Adapter

Rev. 0.6 9/06

USB

Cable

USB Debug Adapter

Target Board

PWR

SILICON LABORATORIES

MCU

P1.6

Port 2

Port 1

Port 0

Port 3

Port 4

Figure 1. Hardware Setup using a USB Debug Adapter

Copyright © 2006 by Silicon Laboratories

C8051F04x-DK

Share Link: