2
Pin Configuration
Smart High-Side Power Switch
BTS 6123B
Pin Configuration
2.1
Pin Assignment BTS 6123B
TAB
Vbb
Figure 3 Pin Configuration P-TO-220-7-180
TO220-7 .emf
2.2
Pin Definitions and Functions
Pin
Symbol
I/O Function
1
OUT
O Output; output to the load; pin 1, 2, 6 and 7 must be
externally shorted.1)
2
OUT
O Output; output to the load; pin 1, 2, 6 and 7 must be
externally shorted.1)
3
IN
I
Input; activates the power switch if shorted to
ground.
4, Tab
Vbb
-
Supply Voltage; positive power supply voltage; tab
and pin 4 are internally shorted.
5
IS
O Sense Output; Diagnostic feedback; provides at
normal operation a sense current proportional to the
load current; in case of overload, over temperature
and/or short circuit a defined current is provided (see
Table 1 "Truth Table" on Page 23).
6
OUT
O Output; output to the load; pin 1, 2, 6 and 7 must be
externally shorted.1)
7
OUT
O Output; output to the load; pin 1, 2, 6 and 7 must be
externally shorted.1)
1) Not shorting all outputs will considerably increase the on-state resistance, reduce the peak current capability,
the clamping capability and decrease the current sense accuracy.
Data Sheet
7
V1.0, 2005-12-15