BR24C21FV Ver la hoja de datos (PDF) - ROHM Semiconductor

Número de pieza

componentes Descripción

Fabricante

BR24C21FV

EDID Memory (For display)

ROHM Semiconductor 

BR24C21xxx Series (1K)

Datasheet

3) Absolute maximum ratings

If the absolute maximum ratings such as impressed voltage and operating temperature range and so forth are exceeded,

LSI may be destructed. Do not impress voltage and temperature exceeding the absolute maximum ratings. In the case of

fear exceeding the absolute maximum ratings, take physical safety countermeasures such as fuses, and see to it that

conditions exceeding the absolute maximum ratings should not be impressed to LSI.

4) GND electric potential

Set the voltage of GND terminal lowest at any action condition. Make sure that each terminal voltages is lower than that

of GND terminal.

5) Heat design

In consideration of permissible dissipation in actual use condition, carry out heat design with sufficient margin.

6) Terminal to terminal shortcircuit and wrong packaging

When to package LSI onto a board, pay sufficient attention to LSI direction and displacement. Wrong packaging may

destruct LSI. And in the case of shortcircuit between LSI terminals and terminals and power source, terminal and GND

owing to foreign matter, LSI may be destructed.

7) Use in a strong electromagnetic field may cause malfunction, therefore, evaluated design sufficiently

Status of this document

The Japanese version of this document is formal specification. A customer may use this translation version only for a reference

to help reading the formal version.

If there are any differences in translation version of this document formal version takes priority.

www.rohm.com

© 2012 ROHM Co., Ltd. All rights reserved.

TSZ22111・15・001

11/18

TSZ02201-0R2R0G100270-1-2

10.Jul.2012 Rev.001

Share Link: