Philips Semiconductors
UHF linear power transistor
Product specification
BLW98
List of components:
C1 = C2 = 1,4 to 5,5 pF film dielectric trimmer (cat. no. 2222 809 09001)
C3 = C4 = 100 nF polyester capacitor
C5 = C6 = 1 nF feed-through capacitor
C7 = 5,6 pF ceramic capacitor
C8 = 2 to 18 pF film dielectric trimmer (cat. no. 2222 809 09003)
C9 = 2 to 9 pF film dielectric trimmer (cat. no. 2222 809 09002)
C10 = 10 µF/40 V solid aluminium electrolytic capacitor
C11 = 470 nF polyester capacitor
C12 = 2 × 3,3 pF chip capacitors (in parallel)
R1 = 150 Ω carbon resistor (0,25 W)
R5 = 4 × 12 Ω carbon resistors in parallel (1 W each)
R2 = 1,8 kΩ carbon resistor (0,5 W)
R6 = 1 kΩ carbon resistor (0,25 W)
R3 = 33 Ω carbon resistor (0,5 W)
R7 = 220 Ω carbon potentiometer (0,25 W)
R4 = 220 Ω carbon resistor (1 W)
L1 = stripline (13,6 mm × 6,9 mm)
L2 = microchoke 0,47 µH (cat. no. 4322 057 04770)
L3 = 1 turn Cu wire (1 mm); internal diameter 5,5 mm; leads 2 × 5 mm
L4 = stripline (40,8 mm × 6,9 mm)
L1 and L4 are striplines on a double Cu-clad printed-circuit board with PTFE fibre-glass dielectric (εr = 2,74);
thickness 1,5 mm.
August 1986
8