BD8314NUV
Technical Note
●Limits of the lowest power supply voltage to start up
When using configuration of inputting VCC voltage from output voltage of DC/DC converter, the input voltage as power
supply for the IC drops by Vf voltage of external Diode.
The worst condition is shown as below.
VCC terminal voltage - Vf voltage of external diode ≧ the worst voltage of UVLO reset voltage(=2.8V)
Please judge this IC is useable or not considering needed start up voltage and load current.
3.2
VOUT=10V, typ
3.0
-35℃
2.8
2.6
2.4
85℃
25℃
2.2
0.1
1.0
10.0
Io [mA]
100.0
Fig.32 start up voltage Vs load current
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
9/15
2011.08 - Rev.D