BD6373GW Ver la hoja de datos (PDF) - ROHM Semiconductor
Número de pieza
componentes Descripción
Fabricante
BD6373GW
ROHM Semiconductor
BD6373GW Datasheet PDF : 18 Pages
| |||
System Lens Driver Series for Digital Still Cameras / Single-lens Reflex Cameras
6ch System Lens Drivers
for Digital Still Cameras /
Single-lens Reflex Cameras
BD6373GW,BD6873KN,BD6753KV
No.09014EAT02
●Description
The BD6373GW motor driver provides 6 Full-ON Drive H-bridge channels. The BD6873KN motor driver provides 5 Full-ON
Drive H-bridge channels and 1 Linear Constant-Current Drive H-bridge channel, while the BD6753KV provides 4 Full-ON
Drive channels and 2 PWM Constant-Current Drive H-bridge channels.
Stepping motors can be used for auto focus, and either zoom or iris. A new drive type (lens barrier) is also available. Three types of drivers
for shutter are offered: a simple Full-ON type, a high-precision linear constant current type, or a high-efficiency PWM constant current type,
enabling selection of the ideal solution based on the application.
●Features
1) Subminiature 31PIN Wafer-level CSP (Chip Size Package): 2.6 x 2.6 x 0.85mm3 (BD6373GW)
2) DMOS output allowing a range power supply: 4.5V to 10.5V (BD6753KV; VM1), 2.0V to 10.5V (BD6753KV; VM2 to VM4)
3) Low ON-Resistance Power MOS output:
Full-ON Drive block with 1.2Ω Typ. (BD6373GW)
Full-ON Drive block with 1.2Ω Typ. and Linear Constant-Current Drive block with 1.0Ω Typ. (BD6873KN)
Full-ON Drive block with 1.2Ω Typ. and PWM Constant-Current Drive block with 1.2Ω Typ. (BD6753KV)
4) Serial interface 3-line bus control input (BD6753KV)
5) Built-in two-step output current setting switch for the Linear Constant-Current Drive block (BD6873KN)
6) Drive mode switching function
7) 1.2V±3% high-precision reference voltage output (BD6873KN)
8) Constant-Current Drive block features phase compensation capacitor-free design (BD6873KN)
9) Built-in ±3% high-precision Linear Constant-Current Driver (BD6873KN)
10) Built-in peak current control PWM Constant-Current Driver (BD6753KV)
11) Built-in charge pump circuit for the DMOS gate voltage drive (BD6753KV)
12) UVLO (Under Voltage Lockout Protection) function
13) Built-in TSD (Thermal Shut Down) circuit
14) Standby current consumption: 0μA Typ.
●Absolute Maximum Ratings
Parameter
Symbol
BD6373GW
Limit
BD6873KN
BD6753KV
Power supply voltage
VCC
-0.5 to +6.5
0 to +7.0
-0.5 to +7.0
Motor power supply voltage
VM
-0.5 to +6.5
0 to +7.0
-0.5 to +12.5
Charge pump voltage
VG
-
-
18.0
Control input voltage
Power dissipation
VIN
-0.5 to VCC+0.5
Pd
940※1
0 to VCC
950※2
-0.5 to VCC+0.5
1125※3
Operating temperature range
Topr
-25 to +85
-25 to +85
-25 to +75
Junction temperature
Tjmax
+150
+150
+150
Storage temperature range
H-bridge output current
Tstg
-55 to +150
-55 to +150
-55 to +150
Iout
-800 to +800※4
-800 to +800※4
-800 to +800※4
※1 Reduced by 7.52mW/°C over 25°C, when mounted on a glass epoxy board (50mm x 58mm x 1.75mm; 8layers).
※2 Reduced by 7.6mW/°C over 25°C, when mounted on a glass epoxy board (70mm x 70mm x 1.6mm).
※3 Reduced by 9.0mW/°C over 25°C, when mounted on a glass epoxy board (70mm x 70mm x 1.6mm).
※4 Must not exceed Pd, ASO, or Tjmax of 150°C.
Unit
V
V
V
V
mW
°C
°C
°C
mA/ch
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
1/17
2009.06 - Rev.A
Share Link: