BD6373GW, BD6873KN, BD6753KV
Technical Note
●I/O Circuit Diagram
ENABLExx, INPUTx, BRAKEx
VMx, OUTxA, OUTxB, PGNDx
VCC
10kΩ
VCC
140kΩ
100kΩ
VMx
OUTxA
OUTxB
PGNDx
Fig.23 BD6373GW I/O Circuit Diagram (Resistance values are typical ones)
PS, INxA, INxB, EN1, IN6, VLIMS
VMx, OUTxA, OUTxB, PGNDx, RNF VREF
VLIMH, VLIML, SENSE
VCC VCC
VMx
VCC
VCC
VCC
10kΩ
100kΩ
OUTxA
OUTxB
PGNDx
RNF
200kΩ
10kΩ
Fig.24 BD6873KN I/O Circuit Diagram (Resistance values are typical ones)
PS
STROBE, CLK, DATA, PWMx
VMx, OUTxA, OUTxB, RNFx
CPH1, CPL1
VCC
VCC VCC
VMx
VCC
VCC
40kΩ
70kΩ
VLIMx, SENSEx
10kΩ
100kΩ
CP3, CP1
VG, CP4, CP2
OUTxA
OUTxB
VCC
100kΩ
RNFx
CR1, CR2
VCC
1kΩ
VCC
VCC
VG
VCC
VCC
5kΩ
CP4
CP2
VM1
Fig.25 BD6753KV I/O Circuit Diagram (Resistance values are typical ones)
●Operation Notes
1) Absolute maximum ratings
Use of the IC in excess of absolute maximum ratings such as the applied voltage or operating temperature range may result in
IC damage. Assumptions should not be made regarding the state of the IC (short mode or open mode) when such damage is
suffered. The implementation of a physical safety measure such as a fuse should be considered when use of the IC in a
special mode where the absolute maximum ratings may be exceeded is anticipated.
2) Storage temperature range
As long as the IC is kept within this range, there should be no problems in the IC’s performance. Conversely, extreme
temperature changes may result in poor IC performance, even if the changes are within the above range.
www.rohm.com
© 2009 ROHM Co., Ltd. All rights reserved.
14/17
2009.06 - Rev.A