Motor driver ICs
BA6872AFM
(12) This IC is not equipped with a circuit to limit in-rush
current. Therefore, connect a current limiting resistor to
limit the in-rush current.
(13) Depending on the thermal dissipation conditions,
power supply voltage, and type of motor, the potentials
on the output pins of this IC can swing to levels well below
GND, and cause faulty operation. In this case, take ap-
propriate countermeasures such as connecting a diode
between the outputs and GND.
FExternal dimensions (Units: mm)
(14) Great care has been paid to the quality of this com-
ponent. However, if the absolute maximum ratings for
temperature and applied voltage are exceeded, the IC
may be destroyed. Since it is not possible to predict
whether the IC will be in the short mode or open mode if
it is destroyed, be sure to use sufficient physical protec-
tive measures (fuses etc.) if there is a chance that the
maximum ratings of the IC will be exceeded.
831