AP8802EV2
AP8802 DEVICE FEATURES
• LED driving current up to 1A
• Input voltage from 8V to 48V
• High efficiency up to 92%
• High switching frequency up to 500KHz
minimum
• PWM/DC input for dimming control
• Built-in soft-start function
• Built-in output open-circuit protection
• SOP-8L, MSOP-8L, DFN3030-10 are
available in “Green” Molding Compound (No
Br, Sb)
• Lead Free Finish/RoHS Compliant
DEVICE APPLICATIONS
• Commercial & industrial lighting
• Small LCD panel backlighting
• Appliance interior lighting
• Architecture detail lighting
AP8802 Device Packages, Pin and Definitions
(1) SOP-8L
( Top View )
SET 1
GND 2
NC 3
VIN 4
8
7
AP8802
6
5
CTRL
GND
SW
SW
(3) DFN3030-10
SOP-8L
( Top View )
SET 1
GND 2
NC 3
NC 4
VIN 5
AP8802
10 CTRL
9 GND
8 NC
7 SW
6 SW
DFN3030-10
(2) SOP-8L-EP
( Top View )
SET 1
8
GND 2
7
AP8802
NC 3
6
VIN 4
5
CTRL
GND
SW
SW
SOP-8L-EP
PIN DESCRIPTION
Name
SW
GND
SET
CTRL
VIN
NC
Description
Switch Pin. Connect inductor/freewheeling diode here. Minimize trace area at this pin to reduce
EMI.
GND pin
Set Nominal Output Current Pin. Configure the output current of the device.
Dimming and On/Off Control Input. Input voltage of 0.2V or lower forces the device into low
current standby mode and shut off the output. A PWM signal allows the output current to be
adjusted above or below the level set by the resistor connected to SET input pin.
The input impedance is about 50k, and if the pin is left open VCTRL = VREF
Input Supply Pin. Must be locally bypassed with a capacitor.
No connection
Issue 5 August 2009
© Diodes Incorporated 2009
2
www.diodes.com