AZ946 Ver la hoja de datos (PDF) - Zettler Electronics

Número de pieza

componentes Descripción

Fabricante

AZ946

MINIATURE PC BOARD RELAY

Zettler Electronics 

AZ946

MINIATURE

PC BOARD RELAY

FEATURES

• Subminiature size

• High sensitivity, 288 mW pick up

• Coils to 24 VDC

• Epoxy sealed for automatic wave soldering

• Contacts rated at 1 or 5 Amps

• Life expectancy to 20 million operations

• Extremely low cost

• UL, CUR file E43203

CONTACTS

Arrangement 2 Form C (DPDT)

Max. Ratings

Light Duty

Noninductive load:

Max. switched power: 30 W or 277 VA

Max. switched current: 1 A

Max. switched voltage: 150 VDC* or 300 VAC

Medium Duty

UL Rating: 1 A at 30 VDC resistive

1 A at 277 VAC general use

(100k cycles)

Max. switched power: 150 W or 1385 VA

Max. switched current: 5 A

Max. switched voltage: 150* VDC or 300 VAC

Material

Resistance

UL Rating: 5 A at 30 VDC resistive

5 A at 277 VAC general use

(100k cycles)

* Note: If switching voltage is greater than 30 VDC,

special precautions must be taken.

Please contact the factory

Light Duty: Silver, gold plated

Medium Duty: Silver Cadmium Oxide, gold plated

Light Duty: 100 milliohms max. initially

Medium Duty: 100 milliohms max.

(6 V 1 A method)

COIL

Power

At Pickup Voltage

(typical)

Max. Continuous

Dissipation

Temperature Rise

Max. Temperature

384 mW standard

288 mW sensitive

1.2 W at 20°C (68°F)

35°C (63°F) standard

30°C (54°F) sensitive

105°C (221°F)

GENERAL DATA

Life Expectancy

Mechanical

Electrical

Minimum operations

2 x 107

1 x 105 (at rated load)

Operate Time (typical) 5 ms at nominal coil voltage

Release Time (typical) 5 ms at nominal coil voltage

(with no coil suppression)

Dielectric Strength

(at sea level for 1 min.)

1000 Vrms coil to contact

750 Vrms between open contacts

1000 Vrms contact set to contact set

Insulation

Resistance

100 megohms min. at 20°C, 500 VDC,

50% RH

Dropout

Greater than 10% of nominal coil voltage

Ambient Temperature

Operating

Vibration

At nominal coil voltage

-10°C (14°F) to 60°C (140°F) standard

-10°C (14°F) to 70°C (158°F) sensitive

0.062" (1.5 mm) DA at 5–55 Hz

Shock

10 g

Enclosure

P.B.T. polyester

Terminals

Tinned copper alloy, P. C.

Max. Solder Temp.

270°C (518°F)

Max. Solder Time

5 seconds

Max.Solvent Temp.

80°C (176°F)

Max. Immersion Time 30 seconds

Weight

12 grams

NOTES

1. All values at 20°C (68°F).

2. Relay may pull in with less than “Must Operate” value.

3. Specifications subject to change without notice.

4. Unsealed relays should not be dipped cleaned

ZETTLER electronics GmbH - A ZETTLER GROUP Company

Junkersstr. 3, D-82178 Puchheim, Germany

phone: +49 89 800 97-0 office@ZETTLERelectronics.com

fax: +49 89 800 97-200

This product specification to be used only together with the application notes

which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf

www.ZETTLERelectronics.com

2014-06-26

Share Link: