ATTINY2313V Ver la hoja de datos (PDF) - Atmel Corporation

Número de pieza

componentes Descripción

Fabricante

ATTINY2313V

8-bit AVR® Microcontroller with 2K Bytes In-System Programmable Flash

Atmel Corporation 

ATtiny2313

AVR CPU Core

Introduction

Architectural

Overview

This section discusses the AVR core architecture in general. The main function of the CPU core

is to ensure correct program execution. The CPU must therefore be able to access memories,

perform calculations, control peripherals, and handle interrupts.

Figure 3. Block Diagram of the AVR Architecture

Data Bus 8-bit

Flash

Program

Memory

Instruction

Register

Instruction

Decoder

Control Lines

Program

Counter

Status

and Control

32 x 8

General

Purpose

Registrers

ALU

Interrupt

Unit

SPI

Unit

Watchdog

Timer

Analog

Comparator

Data

SRAM

EEPROM

I/O Module1

I/O Module 2

I/O Module n

I/O Lines

In order to maximize performance and parallelism, the AVR uses a Harvard architecture – with

separate memories and buses for program and data. Instructions in the program memory are

executed with a single level pipelining. While one instruction is being executed, the next instruc-

tion is pre-fetched from the program memory. This concept enables instructions to be executed

in every clock cycle. The program memory is In-System Reprogrammable Flash memory.

The fast-access Register File contains 32 x 8-bit general purpose working registers with a single

clock cycle access time. This allows single-cycle Arithmetic Logic Unit (ALU) operation. In a typ-

ical ALU operation, two operands are output from the Register File, the operation is executed,

and the result is stored back in the Register File – in one clock cycle.

7

2543L–AVR–08/10

Share Link: