ATF1502ASV Ver la hoja de datos (PDF) - Atmel Corporation

Número de pieza

componentes Descripción

Fabricante

ATF1502ASV

High performance EEPROM CPLD

Atmel Corporation 

9. Electrical Specifications

Table 9-1. Absolute Maximum Ratings*

Temperature Under Bias.................................. -40°C to +85°C

Storage Temperature ..................................... -65°C to +150°C

Voltage on Any Pin with

Respect to Ground .........................................-2.0V to +7.0V(1)

Voltage on Input Pins

with Respect to Ground

During Programming.....................................-2.0V to +14.0V(1)

Programming Voltage with

Respect to Ground .......................................-2.0V to +14.0V(1)

ATF1502ASV

*NOTICE:

Stresses beyond those listed under “Absolute

Maximum Ratings” may cause permanent dam-

age to the device. This is a stress rating only and

functional operation of the device at these or any

other conditions beyond those indicated in the

operational sections of this specification is not

implied. Exposure to absolute maximum rating

conditions for extended periods may affect device

reliability.

Note:

1. Minimum voltage is -0.6V DC, which may under-

shoot to -2.0V for pulses of less than 20 ns.

Maximum output pin voltage is VCC + 0.75V DC,

which may overshoot to 7.0V for pulses of less

than 20 ns.

Table 9-2. DC and AC Operating Conditions

Operating Temperature (Ambient)

VCC (3.3V) Power Supply

Commercial

0°C - 70°C

3.0V – 3.6V

Industrial

-40°C - 85°C

3.0V – 3.6V

Table 9-3. Pin Capacitance(1)

Typ

Max

Units

Conditions

CIN

8

10

pF

CI/O

8

10

pF

VIN = 0V; f = 1.0 MHz

VOUT = 0V; f = 1.0 MHz

Note: 1. Typical values for nominal supply voltage. This parameter is only sampled and is not 100% tested. The OGI pin (high-voltage

pin during programming) has a maximum capacitance of 12 pF.

11

1615J–PLD–01/06

Share Link: