ATA6602 Ver la hoja de datos (PDF) - Atmel Corporation

Número de pieza

componentes Descripción

Fabricante

ATA6602

Microcontroller with LIN Transceiver, 5V Regulator and Watchdog

Atmel Corporation 

ATA6602/ATA6603

Table 3-2.

Rwd_osc

kΩ

10

51

91

120

Table of Watchdog Timings

Oscillator

Period

tosc/µs

2.6

Lead

Time

td/ms

10.2

Closed

Window

t1/ms

2.08

12.5

49.4

10

22.4

87.8

17.92

29

113.7

23.2

Open Window

t2/ms

2.18

10.5

18.82

24.36

Trigger Period from

microcontroller

twd/ms

2.90

Reset time

tnres/ms

0.41

14.2

1.96

25.45

3.52

32.94

4.55

3.3.18

Temperature Monitor at Pin TEMP

In addition to the internal temperature monitoring of the voltage regulator, an additional sensor

measures the junction temperature and provides a linearized voltage at the TEMP pin. Together

with the analog functions of the microcontroller (for example, the analog comparator and the

Analog-to-Digital Converter (ADC)), this enables the application to detect overload conditions

and to take corresponding measures in order to prevent damage. An external capacitor buffers

the voltage due to the input current of the ADC.

The sensor itself is built out of three diodes which are supplied by an internal BIAS current in Pre

Normal Mode and Normal Mode. The typical voltage at T = 27°C is Vtemp = 2.2V with a typical

negative temperature coefficient of VTC,TEMP = –5.05 mV/k. In silent and sleep mode the 20 µA

current source is switched off.

Figure 3-10. Temperature Monitor

VDD

TEMP

20 µA

17

4921C–AUTO–01/07

Share Link: