AT25F512B-SSH-T Ver la hoja de datos (PDF) - Atmel Corporation

Número de pieza

componentes Descripción

Fabricante

AT25F512B-SSH-T

512-Kilobit 2.7-volt Minimum SPI Serial Flash Memory

Atmel Corporation 

Features

• Single 2.7V - 3.6V Supply

• Serial Peripheral Interface (SPI) Compatible

– Supports SPI Modes 0 and 3

• 70 MHz Maximum Operating Frequency

– Clock-to-Output (tV) of 6 ns Maximum

• Flexible, Optimized Erase Architecture for Code + Data Storage Applications

– Uniform 4-Kbyte Block Erase

– Uniform 32-Kbyte Block Erase

– Full Chip Erase

• Hardware Controlled Locking of Protected Sectors via WP Pin

• 128-Byte Programmable OTP Security Register

• Flexible Programming

– Byte/Page Program (1 to 256 Bytes)

• Fast Program and Erase Times

– 2.5 ms Typical Page Program (256 Bytes) Time

– 100 ms Typical 4-Kbyte Block Erase Time

– 500 ms Typical 32-Kbyte Block Erase Time

• Automatic Checking and Reporting of Erase/Program Failures

• JEDEC Standard Manufacturer and Device ID Read Methodology

• Low Power Dissipation

– 6 mA Active Read Current (Typical at 20 MHz)

– 5 µA Deep Power-Down Current (Typical)

• Endurance: 100,000 Program/Erase Cycles

• Data Retention: 20 Years

• Complies with Full Industrial Temperature Range

• Industry Standard Green (Pb/Halide-free/RoHS Compliant) Package Options

– 8-lead SOIC (150-mil Wide)

– 8-pad Ultra Thin DFN (2 x 3 x 0.6 mm)

1. Description

The AT25F512B is a serial interface Flash memory device designed for use in a wide

variety of high-volume consumer based applications in which program code is shad-

owed from Flash memory into embedded or external RAM for execution. The flexible

erase architecture of the AT25F512B, with its erase granularity as small as 4 Kbytes,

makes it ideal for data storage as well, eliminating the need for additional data storage

EEPROM devices.

The erase block sizes of the AT25F512B have been optimized to meet the needs of

today's code and data storage applications. By optimizing the size of the erase blocks,

the memory space can be used much more efficiently. Because certain code modules

and data storage segments must reside by themselves in their own erase regions, the

wasted and unused memory space that occurs with large sectored and large block

erase Flash memory devices can be greatly reduced. This increased memory space

efficiency allows additional code routines and data storage segments to be added

while still maintaining the same overall device density.

The device also contains a specialized OTP (One-Time Programmable) Security Reg-

ister that can be used for purposes such as unique device serialization, system-level

Electronic Serial Number (ESN) storage, locked key storage, etc.

Specifically designed for use in 3-volt systems, the AT25F512B supports read, pro-

gram, and erase operations with a supply voltage range of 2.7V to 3.6V. No separate

voltage is required for programming and erasing.

512-Kilobit

2.7-volt

Minimum

SPI Serial Flash

Memory

AT25F512B

Preliminary

3689C–DFLASH–12/08

Share Link: