AS1531 Ver la hoja de datos (PDF) - austriamicrosystems AG
Número de pieza
componentes Descripción
Fabricante
AS1531 Datasheet PDF : 29 Pages
| |||
AS1530/AS1531
Data Sheet - Pinout
4 Pinout
Pin Assignments
Figure 2. Pin Assignments (Top View)
CH0 1
CH1 2
CH2 3
CH3 4
CH4 5
CH5 6
CH6 7
CH7 8
COM 9
VDD3 10
AS1530/
AS1531
20 VDD1
19 VDD2
18 SCLK
17 CSN
16 DIN
15 SSTRB
14 DOUT
13 GND
12 REFADJ
11 REF
Pin Descriptions
Table 1. Pin Descriptions
Pin Number Pin Name
1:8
CH0:CH7
9
COM
10
VDD3
11
REF
12
REFADJ
13
GND
14
DOUT
15
SSTRB
16
DIN
17
CSN
18
SCLK
19
VDD2
20
VDD1
Description
Analog Sampling Inputs. These eight pins serve as analog sampling inputs.
Common Analog Inputs. Tie this pin to ground in single-ended mode.
Positive Supply Voltage
Reference-Buffer Output/A/DC Reference Input. This pin serves as the reference
voltage for analog-to-digital conversions. In internal reference mode, the reference
buffer provides a +2.50V nominal output, externally adjustable at pin REFADJ. In
external reference mode, disable the internal buffer by pulling pin REFADJ to VDD1.
Reference-Buffer Amplifier Input. To disable the reference-buffer amplifier, tie this
pin to VDD1.
Analog and Digital Ground
Serial Data Output. Data is clocked out at the rising edge of pin SCLK. DOUT is high
impedance when CSN is high.
Serial Strobe Output. SSTRB pulses high for one clock period before the MSB is
clocked out. SSTRB is high impedance when CSN is high.
Serial Data Input. Data is clocked in at the rising edge of SCLK.
Active-Low Chip Select. Data will not be clocked into pin DIN unless CSN is low.
When CSN is high, pins DOUT and SSTRB are high impedance.
Serial Clock Input. This pin clocks data into and out of the serial interface, and is used
to set the conversion speed.
Note: The duty cycle must be between 40 and 60%.
Positive Supply Voltage
Positive Supply Voltage
www.austriamicrosystems.com
Revision 1.02
3 - 29
Share Link: 